1. Fundamentals ( 2 hours)
1.1 Evolution of Computer
1.2 Classification
1.2.1 Operation: Analog and Digital
1.2.2 Uses: General purpose and Specific purpose
1.2.3 Capacity: Mainframe, Mini, Personal, and Super computer
2. Basic Architecture ( 7 hours)
2.1 Building blocks of a PC
2.1.1 CPU
2.1.2 Memory
2.1.3 Input
2.1.4 Output
2.2 The Storage devices: Floppy Disk and Harddisk
2.3. Introduction of Peripherals
3. Operating System ( 4 hours)
3.1 Definition and Classification
3.2 Functions of Operating System
3.3 DOS
3.4 Windows
3.5 Mac OS
3.6 Unix
3.7 OS/2
4. Programming Languages, Interpreters and Compilers (4 hours)
4.1 Introduction and basic elements of programming language
4.2 Classification of programming language
4.3 Characteristics of Computer program
4.4 Assembler, Interpreter, and Compiler
4.5 Introduction to programming languages
5. Software Applications ( 5 hours)
5.1 Word Processor
5.2 Spreadsheet
5.3 Database
5.4 Graphics
5.5 Engineering
5.6 Customized Packages
6. Peripherals and Accessories ( 10 hours)
6.1 Printer/Plotter
6.2 Scanner
6.3 Mouse/Digitizer
6.4 CD-ROM/Optical Drive/Tape Drive
7. Network and Internet ( 12 hours)
7.1 Peer to peer and Dedicated server types
7.2 Topologies: Bus, Ring and Star
7.3 Network Cabling: 10Base2, 10BaseT, 10Base5, 100BaseT, Hub, Terminator, T
7.4 Networking Operating System: Novell NetWare, Windows NT, LANtastic, Windows95, SCO Unix, Banyan Vines, LAN Manager
7.5 Advantages, Disadvantages
7.6 The Internet
8. Computer Application ( 1 hour)
8.1 Computer Application
8.2 Impact of Computers on Society
8.3 Future development
Laboratory:
1. Six lab exercises covering computer hardware and Software.
2. Demonstration of Computer Network.
References:
1. Winn Rosch, "Hardware Bible"
2. P. K. Sinha, "Computer Fundamentals"
Showing posts with label Third Semester. Show all posts
Showing posts with label Third Semester. Show all posts
Sunday, September 14, 2008
Semiconductor Devices
COURSE OBJECTIVES
To introduce the fundamentals of analysis of electronic circuits containing modern electronic components.
1.0 Linear Device Models: (6 hours)
1.1 Voltage-controlled voltage source model
1.2 Voltage-controlled current source model
1.3 Input and output resistance
1.4 Voltage and power gain calculations
1.5 Reverse transfer concept and the hybrid-pi circuit
1.6 Voltage gain calculations using the hybrid-pi circuit
1.7 y, z and h parameter calculations from the hybrid-pi circuit
1.8 Hybrid-pi circuit parameter calculations from the y, z and h parameters
2.0 Two-Terminal Nonlinear Devices: (6 hours)
2.1 Nonlinear circuit analysis
2.2 The load line
2.3 The perfect diode and circuit calculations
2.4 Semi conductor diode characteristics
2.5 Modeling the semi conductor diode and circuit calculations
2.6 Zener diode characteristics, modeling and circuit analysis
3.0 The Junction Field-Effect Transistor, a Three-Terminal Nonlinear Device: (6 hours)
3.1 JFET quadratic characteristics
3.2 Load line construction and biasing
3.3 Small-signal model around a dc operations point
3.4 JFET amplifier small-signal analysis
4.0 The Bipolar Transistor, a Three-Terminal Nonlinear Device: (8 hours)
4.1 The Ebers-Moll equations
4.2 Transistor configurations
4.3 Load line and biasing in the common-base configuration
4.4 Small-signal model around a dc operating point
4.5 Common-base amplifier small-signal analysis
4.6 Load line and biasing in the common-emitter configuration
4.7 Small-signal model around a dc operating point
4.8 Common-emitter amplifier small-signal analysis
4.9 Load-line and biasing in the common-collector configuration
4.10 Small-signal model around a dc operating point
4.11 Common-collector amplifier small-signal analysis
5.0 The Metal-oxide-semi conductor Transistor, a Three-Terminal Nonlinear Device: (6 hours)
5.1 The MOSFET quadratic characteristics
5.2 MOSFET load line and biasing
5.3 Small-signal model around a dc operating point
5.4 MOSFET amplifier small-signal analysis
6.0 Switching Circuits: (5 hours)
6.1 The bipolar transistor switch
6.2 Bipolar transistor logic circuits, examples of TTL circuits
6.3 The MOSFET switch
6.4 The NMOS family of logic circuits, some examples
6.5 The CMOS family of logic circuits, some examples
7.0 The Operational Amplifier: (6 hours)
7.1 The ideal operational amplifier
7.2 Feedback ideas
7.3 Inverting and non-inverting amplifiers
7.4 Summing amplifier
7.5 Integrator
7.6 Differentiator
7.7 Simple RC active filter
7.8 Combination of real diodes and the ideal operational amplifier in circuits such as the precision rectifier, the peak detector, the voltage clamp, etc.
Laboratory:
1.0 Introductory laboratory to familiarize students with equipment.
2.0 Diode characteristics, rectifiers, zener diodes.
3.0 Junction field-effect transistor characteristics and single stage amplifiers.
4.0 Bipolar transistor characteristics and single stage amplifiers.
5.0 some basic bipolar circuits for integrated circuit design: widlar current sources, current mirrors.
6.0 CMOS inverter characteristics, simple oscillator circuit.
Reference Book:
1.0 A. S. Sedra and K. C. Smith, “Microelectronic Circuits”, 2nd Edition, Holt, Rinehart and Winston, Inc., New York, 1987.
2.0 J. R. Cogdell, “Foundations of Electrical Engineering”, Prentice Hall, Englewood Cliffs, New Jersey, 1990.
To introduce the fundamentals of analysis of electronic circuits containing modern electronic components.
1.0 Linear Device Models: (6 hours)
1.1 Voltage-controlled voltage source model
1.2 Voltage-controlled current source model
1.3 Input and output resistance
1.4 Voltage and power gain calculations
1.5 Reverse transfer concept and the hybrid-pi circuit
1.6 Voltage gain calculations using the hybrid-pi circuit
1.7 y, z and h parameter calculations from the hybrid-pi circuit
1.8 Hybrid-pi circuit parameter calculations from the y, z and h parameters
2.0 Two-Terminal Nonlinear Devices: (6 hours)
2.1 Nonlinear circuit analysis
2.2 The load line
2.3 The perfect diode and circuit calculations
2.4 Semi conductor diode characteristics
2.5 Modeling the semi conductor diode and circuit calculations
2.6 Zener diode characteristics, modeling and circuit analysis
3.0 The Junction Field-Effect Transistor, a Three-Terminal Nonlinear Device: (6 hours)
3.1 JFET quadratic characteristics
3.2 Load line construction and biasing
3.3 Small-signal model around a dc operations point
3.4 JFET amplifier small-signal analysis
4.0 The Bipolar Transistor, a Three-Terminal Nonlinear Device: (8 hours)
4.1 The Ebers-Moll equations
4.2 Transistor configurations
4.3 Load line and biasing in the common-base configuration
4.4 Small-signal model around a dc operating point
4.5 Common-base amplifier small-signal analysis
4.6 Load line and biasing in the common-emitter configuration
4.7 Small-signal model around a dc operating point
4.8 Common-emitter amplifier small-signal analysis
4.9 Load-line and biasing in the common-collector configuration
4.10 Small-signal model around a dc operating point
4.11 Common-collector amplifier small-signal analysis
5.0 The Metal-oxide-semi conductor Transistor, a Three-Terminal Nonlinear Device: (6 hours)
5.1 The MOSFET quadratic characteristics
5.2 MOSFET load line and biasing
5.3 Small-signal model around a dc operating point
5.4 MOSFET amplifier small-signal analysis
6.0 Switching Circuits: (5 hours)
6.1 The bipolar transistor switch
6.2 Bipolar transistor logic circuits, examples of TTL circuits
6.3 The MOSFET switch
6.4 The NMOS family of logic circuits, some examples
6.5 The CMOS family of logic circuits, some examples
7.0 The Operational Amplifier: (6 hours)
7.1 The ideal operational amplifier
7.2 Feedback ideas
7.3 Inverting and non-inverting amplifiers
7.4 Summing amplifier
7.5 Integrator
7.6 Differentiator
7.7 Simple RC active filter
7.8 Combination of real diodes and the ideal operational amplifier in circuits such as the precision rectifier, the peak detector, the voltage clamp, etc.
Laboratory:
1.0 Introductory laboratory to familiarize students with equipment.
2.0 Diode characteristics, rectifiers, zener diodes.
3.0 Junction field-effect transistor characteristics and single stage amplifiers.
4.0 Bipolar transistor characteristics and single stage amplifiers.
5.0 some basic bipolar circuits for integrated circuit design: widlar current sources, current mirrors.
6.0 CMOS inverter characteristics, simple oscillator circuit.
Reference Book:
1.0 A. S. Sedra and K. C. Smith, “Microelectronic Circuits”, 2nd Edition, Holt, Rinehart and Winston, Inc., New York, 1987.
2.0 J. R. Cogdell, “Foundations of Electrical Engineering”, Prentice Hall, Englewood Cliffs, New Jersey, 1990.
Labels:
EG532EX,
First Part,
Second Year,
Semiconductor Devices,
Third Semester
Electric Circuits II
Course Objectives: To continue work in Electric Circuits I including the use of the Laplace Transform to determine the time and frequency domain responses of electric circuits.
1.0 Matrix Methods in Network Analysis: (4 Hours)
1.1 Mesh Analysis
1.2 Nodal analysis
2.0 Review of Classical Solution if Ordinary Differential Equations With Constant Coefficients: (5 hours)
2.1 First order differential equations, RL and RC circuits
2.2 General and particular solution
2.3 Initial conditions on L's and C's
2.4 Natural unforced response of LR and CR circuits from initial conditions, time
constant
2.5 Complete transient and steady state response of first order system including
initial conditions and applied forcing functions.
3.0 Complete Time Domain Response of Second and Higher Order System: (5 hours)
3.1 Initial conditions
3.2 Transient and steady state components of response including initial conditions
3.3 RLC resonance, damping factors, high and low Q circuits
4.0 Review of Laplace Transform: (4 hours)
4.1 Definitions and properties valuable for network analysis
4.2 Laplace transform of common forcing functions
4.2.1 Step and shifted step functions
4.2.2 Ramp and impulse functions
4.2.3 Sinusoidal functions
4.3 Real translation and complex translation theorem
4.4 Partial fraction expansion
5.0 Use of Laplace Transform Techniques for Solution of Ordinary Differential Equations with Constant Coefficients: (4 hours)
5.1 Transient and steady-state responses of networks to step, ramp, impulse and
sinusoidal forcing functions with and without initial conditions on L's and C's
5.1.1 First order systems
5.1.2 Second and higher order systems
6.0 Transfer Functions, Poles and Zeros of Networks: (4 hours)
6.1 Concept of complex frequency
6.2 Transfer functions for two part networks
6.3 Poles and zeros of network functions
6.4 Relationship between pole/zero and system time response
7.0 Frequency Response of Networks: (4 Hours)
7.1 Magnitude and phase response
7.2 Bode diagrams
7.3 Band width, high-Q and low-Q circuits
7.4 Basic concept of filters, high-pass, band stop, low and band-pass filters
8.0 Fourier Series and transform: (5 hours)
8.1 Basic concept of Fourier series and analysis
8.2 Evaluation of Fourier coefficients for periodic non-sinusoidal waveforms in electric networks
8.3 Introduction of Fourier transforms
9.0 Two-port Parameters of Networks: (6 hours)
9.1 Definition of two-port networks
9.2 Short circuit admittance parameters
9.3 Open circuit impedance parameters
9.4 Transmission Short circuit admittance parameters
9.5 Hybrid parameters
9.6 Relationship and transformations between sets of parameters
9.7 Applications to filters
9.8 Applications to transmission lines
10.0 State Space Analysis: (4 hours)
10.1 Concept of state and state variables
10.2 State space representation of network equations
Laboratory:
1.0 Transient Response in first Order System Passive Circuits
- measure step and impulse of RC and RL circuits using oscilloscope
- relate time responses to analytical transfer function) calculations
2.0 Transform Response in Second Order System Passive Circuits
- measure step and impulse response of RLC series and parallel circuits using oscilloscope
- relate time responses to transfer functions and pole-zero configuration
3.0 Frequency Response of first and Second Order Passive Circuits
- measure amplitude and phase response and plot Bode diagrams for RL, RC and RLC circuits
- relate body diagrams to transfer functions and pole-zero configuration circuits.
4.0 Electric circuits Simulation Study
- Use SPICE program to simulate circuit and tests carried out in lab 1-3 and compare result from measurement with those from SPICE
5.0 Measurement of Harmonic Content of a Voltage
- Calculate Fourier coefficients for a square wave and variety this by harmonic measurements of a signal form a square wave generator using harmonic analyser.
- Repeat for a half wave rectified wave form using a diode and a resistor
Reference Books:
a) M.E. Van Valkenburg, "Network Analysis", third Edition, Prentice hall, 1995
b) William H. Hayt. Jr. & Jack E. Kemmerly, “Engineering Circuits Analysis", Forth edition, McGraw Hill International, Editions, Electrical Engineering Series, 1987.
c) Michel D. Cilletti, "Introduction to Circuits Analysis and Design", Holt, Hot Rinehart and Winston International Edition, New York, 1988.
1.0 Matrix Methods in Network Analysis: (4 Hours)
1.1 Mesh Analysis
1.2 Nodal analysis
2.0 Review of Classical Solution if Ordinary Differential Equations With Constant Coefficients: (5 hours)
2.1 First order differential equations, RL and RC circuits
2.2 General and particular solution
2.3 Initial conditions on L's and C's
2.4 Natural unforced response of LR and CR circuits from initial conditions, time
constant
2.5 Complete transient and steady state response of first order system including
initial conditions and applied forcing functions.
3.0 Complete Time Domain Response of Second and Higher Order System: (5 hours)
3.1 Initial conditions
3.2 Transient and steady state components of response including initial conditions
3.3 RLC resonance, damping factors, high and low Q circuits
4.0 Review of Laplace Transform: (4 hours)
4.1 Definitions and properties valuable for network analysis
4.2 Laplace transform of common forcing functions
4.2.1 Step and shifted step functions
4.2.2 Ramp and impulse functions
4.2.3 Sinusoidal functions
4.3 Real translation and complex translation theorem
4.4 Partial fraction expansion
5.0 Use of Laplace Transform Techniques for Solution of Ordinary Differential Equations with Constant Coefficients: (4 hours)
5.1 Transient and steady-state responses of networks to step, ramp, impulse and
sinusoidal forcing functions with and without initial conditions on L's and C's
5.1.1 First order systems
5.1.2 Second and higher order systems
6.0 Transfer Functions, Poles and Zeros of Networks: (4 hours)
6.1 Concept of complex frequency
6.2 Transfer functions for two part networks
6.3 Poles and zeros of network functions
6.4 Relationship between pole/zero and system time response
7.0 Frequency Response of Networks: (4 Hours)
7.1 Magnitude and phase response
7.2 Bode diagrams
7.3 Band width, high-Q and low-Q circuits
7.4 Basic concept of filters, high-pass, band stop, low and band-pass filters
8.0 Fourier Series and transform: (5 hours)
8.1 Basic concept of Fourier series and analysis
8.2 Evaluation of Fourier coefficients for periodic non-sinusoidal waveforms in electric networks
8.3 Introduction of Fourier transforms
9.0 Two-port Parameters of Networks: (6 hours)
9.1 Definition of two-port networks
9.2 Short circuit admittance parameters
9.3 Open circuit impedance parameters
9.4 Transmission Short circuit admittance parameters
9.5 Hybrid parameters
9.6 Relationship and transformations between sets of parameters
9.7 Applications to filters
9.8 Applications to transmission lines
10.0 State Space Analysis: (4 hours)
10.1 Concept of state and state variables
10.2 State space representation of network equations
Laboratory:
1.0 Transient Response in first Order System Passive Circuits
- measure step and impulse of RC and RL circuits using oscilloscope
- relate time responses to analytical transfer function) calculations
2.0 Transform Response in Second Order System Passive Circuits
- measure step and impulse response of RLC series and parallel circuits using oscilloscope
- relate time responses to transfer functions and pole-zero configuration
3.0 Frequency Response of first and Second Order Passive Circuits
- measure amplitude and phase response and plot Bode diagrams for RL, RC and RLC circuits
- relate body diagrams to transfer functions and pole-zero configuration circuits.
4.0 Electric circuits Simulation Study
- Use SPICE program to simulate circuit and tests carried out in lab 1-3 and compare result from measurement with those from SPICE
5.0 Measurement of Harmonic Content of a Voltage
- Calculate Fourier coefficients for a square wave and variety this by harmonic measurements of a signal form a square wave generator using harmonic analyser.
- Repeat for a half wave rectified wave form using a diode and a resistor
Reference Books:
a) M.E. Van Valkenburg, "Network Analysis", third Edition, Prentice hall, 1995
b) William H. Hayt. Jr. & Jack E. Kemmerly, “Engineering Circuits Analysis", Forth edition, McGraw Hill International, Editions, Electrical Engineering Series, 1987.
c) Michel D. Cilletti, "Introduction to Circuits Analysis and Design", Holt, Hot Rinehart and Winston International Edition, New York, 1988.
Computer Programing II in C++
Objectives
The course objective is to familiarize students with the Object-Oriented Analysis, Design and Programming. The practical component of this course is based on C++.
1.0 Overview (2 hrs)
1.1. Procedural programming and issues with procedural programming
1.2. Why Object-Oriented programming
1.3. Object-Oriented concepts
1.3.1. Abstraction
1.3.2. Encapsulation
1.3.3. Inheritance
1.3.4. Polymorphism
1.4. Advantages of Object-Oriented programming
2. Introduction and History of C++ (3 hrs)
2.1. Why C++
2.2. History and Evolution of C++
2.3. Features of C++
3. C++ Language basic syntax (3 hrs)
3.1. Fundamental data types
3.2. Declarations and definitions
3.3. Derived types
3.4. Standard conversions and promotions
3.5. Statements
3.6. Arrays and pointer in C++
3.7. const
3.8. Enumeration
3.9. Flow control
3.10. Comments
4. Functions (Methods) in C++ (4 hrs)
4.1. Syntax of functions
4.2. Functions name overloading
4.3. Default arguments
4.4. Inline functions
4.5. Variable arguments
4.6. Return types
4.7. Parameter passing
5. Support for classes in C++ (5 hrs)
5.1. Class syntax
5.2. Data Encapsulation (public, protected, private modifiers)
5.3. Inheritance
5.4. Scope resolutions operator
5.5. "this" pointer
5.6. static or class member functions
5.7. Unions in C++
5.8. Accessibility of member functions and member variables
6. Exceptions to C++ Encapsulation ( 1 hr)
6.1. Friend functions
6.1.1. Overloading and friend functions
6.2. Friend classes
7. Object Initialization and Destruction (3 hrs)
7.1. Constructors - need for constructors
7.2. Syntax of constructors
7.3. Syntax of destructors
7.4. Unions and Constructors
7.5. Other Constructors
7.5.1. Copy constructors
8. Overloading Operators (3 hrs)
8.1. Operator overloading - justification
8.2. Friends vs. Member functions
8.3. Streams Operator overloading
9. Inheritance - Foundation for reuse (5 hrs)
9.1. Types of inheritance
9.2. When to use inheritance
9.3. Motivation for inheritance
9.4. Derivation of C++ classes
9.5. Scope of inherited member functions
9.6. Scope of inherited member variables
9.7. Class structure in memory
9.8. Inheritance and operator functions
9.9. Multiple inheritance
9.10. Constructor for multiply derived classes
9.11. Destructors for multiply derived classes
9.12. Virtual base classes
10. Polymorphism and Dynamic Binding (3 hrs)
10.1. Virtual Functions
10.2. Pure Virtual functions and Abstract classes
11. Input/Output ( 5 hrs)
11.1. Stream based input/output
11.2. Input/Output class hierarchy
11.3. File Input/Output
12. Advanced C++ topics
12.1. Templates (3 hrs)
12.1.1. Reuse via type parameters
12.1.2. Declaring container classes
12.1.3. Template Constructs
12.1.4. Standard Template Library
12.2. Run Time Type Information (1 hr)
12.3. Namespaces ( 1 hr)
12.4. Exceptions (3 hrs)
12.4.1. What are Exceptions
12.4.2. Benefits of Exception Handling
12.4.3. Exception Handling Syntax: catch, throw and try
12.4.4. Error handling in libraries
12.4.5. Passing error handling
Laboratories:
There shall be 12 lab exercises covering features of object-oriented programming. By the end of this course each student must complete a major programming project based on OOP.
References:
1. Robert Lafore, "Object-Oriented Programming in C++", Galgotia Publications, India.
2. Deitel & Deitel, "C++ How to Program", 2/e , Prentice Hall
3. Navajyoti Barkakati , "Object-Oriented Programming in C++", Prentice Hall of India
The course objective is to familiarize students with the Object-Oriented Analysis, Design and Programming. The practical component of this course is based on C++.
1.0 Overview (2 hrs)
1.1. Procedural programming and issues with procedural programming
1.2. Why Object-Oriented programming
1.3. Object-Oriented concepts
1.3.1. Abstraction
1.3.2. Encapsulation
1.3.3. Inheritance
1.3.4. Polymorphism
1.4. Advantages of Object-Oriented programming
2. Introduction and History of C++ (3 hrs)
2.1. Why C++
2.2. History and Evolution of C++
2.3. Features of C++
3. C++ Language basic syntax (3 hrs)
3.1. Fundamental data types
3.2. Declarations and definitions
3.3. Derived types
3.4. Standard conversions and promotions
3.5. Statements
3.6. Arrays and pointer in C++
3.7. const
3.8. Enumeration
3.9. Flow control
3.10. Comments
4. Functions (Methods) in C++ (4 hrs)
4.1. Syntax of functions
4.2. Functions name overloading
4.3. Default arguments
4.4. Inline functions
4.5. Variable arguments
4.6. Return types
4.7. Parameter passing
5. Support for classes in C++ (5 hrs)
5.1. Class syntax
5.2. Data Encapsulation (public, protected, private modifiers)
5.3. Inheritance
5.4. Scope resolutions operator
5.5. "this" pointer
5.6. static or class member functions
5.7. Unions in C++
5.8. Accessibility of member functions and member variables
6. Exceptions to C++ Encapsulation ( 1 hr)
6.1. Friend functions
6.1.1. Overloading and friend functions
6.2. Friend classes
7. Object Initialization and Destruction (3 hrs)
7.1. Constructors - need for constructors
7.2. Syntax of constructors
7.3. Syntax of destructors
7.4. Unions and Constructors
7.5. Other Constructors
7.5.1. Copy constructors
8. Overloading Operators (3 hrs)
8.1. Operator overloading - justification
8.2. Friends vs. Member functions
8.3. Streams Operator overloading
9. Inheritance - Foundation for reuse (5 hrs)
9.1. Types of inheritance
9.2. When to use inheritance
9.3. Motivation for inheritance
9.4. Derivation of C++ classes
9.5. Scope of inherited member functions
9.6. Scope of inherited member variables
9.7. Class structure in memory
9.8. Inheritance and operator functions
9.9. Multiple inheritance
9.10. Constructor for multiply derived classes
9.11. Destructors for multiply derived classes
9.12. Virtual base classes
10. Polymorphism and Dynamic Binding (3 hrs)
10.1. Virtual Functions
10.2. Pure Virtual functions and Abstract classes
11. Input/Output ( 5 hrs)
11.1. Stream based input/output
11.2. Input/Output class hierarchy
11.3. File Input/Output
12. Advanced C++ topics
12.1. Templates (3 hrs)
12.1.1. Reuse via type parameters
12.1.2. Declaring container classes
12.1.3. Template Constructs
12.1.4. Standard Template Library
12.2. Run Time Type Information (1 hr)
12.3. Namespaces ( 1 hr)
12.4. Exceptions (3 hrs)
12.4.1. What are Exceptions
12.4.2. Benefits of Exception Handling
12.4.3. Exception Handling Syntax: catch, throw and try
12.4.4. Error handling in libraries
12.4.5. Passing error handling
Laboratories:
There shall be 12 lab exercises covering features of object-oriented programming. By the end of this course each student must complete a major programming project based on OOP.
References:
1. Robert Lafore, "Object-Oriented Programming in C++", Galgotia Publications, India.
2. Deitel & Deitel, "C++ How to Program", 2/e , Prentice Hall
3. Navajyoti Barkakati , "Object-Oriented Programming in C++", Prentice Hall of India
Mathematics III
COURSE OBJECTIVES
The purpose of this course is to round out the student's preparation for more sophisticated applications with an introduction to linear algebra, a continuation of the study of ordinary differential equations and an introduction to vector calculus.
1. Matrices and determinants (8 hours)
1.1 Matrix and determinants.
1.2 Vector spaces
1.3 Linear transformations
1.4 System of linear equations, Gauss elimination.
1.5 Rank, matrix inversion.
1.6 Eigen values, eigen vectors.
2 Fourier series (4 hours)
2.1 Fourier series,
2.2 Periodic functions
2.3 Odd and even functions.
2.4 Fourier series for arbitrary range.
2.5 Half range Fourier series.
3. Laplace transforms (8 hours)
3.1 Laplace transforms.
3.2 Standard L- transforms.
3.3 Inverse laplace transforms.
3.4 Applications.
4 Vector Calculus (7 hours)
4.1 Vector Calculus.
4.2 Differentiation and Integration of Vectors.
4.3 Divergence.
4.4 Gradient curl.
5 Line, surface and volume integrals (18 hours)
5.1 Line integrals.
5.2 Surface and volume integrals.
5.3 Integral transformation theorems- Stoke's, Gauss and Green's theorems.
Textbook
1.0 E. Kreszig, "Advanced Engineering Mathematics", Fifth Edition, Wiley, New York.
2.0 M. M. Guterman and Z.N. Nitecki, "Differential Equations, a First Course", 2nd Edition, Saunders, New York
The purpose of this course is to round out the student's preparation for more sophisticated applications with an introduction to linear algebra, a continuation of the study of ordinary differential equations and an introduction to vector calculus.
1. Matrices and determinants (8 hours)
1.1 Matrix and determinants.
1.2 Vector spaces
1.3 Linear transformations
1.4 System of linear equations, Gauss elimination.
1.5 Rank, matrix inversion.
1.6 Eigen values, eigen vectors.
2 Fourier series (4 hours)
2.1 Fourier series,
2.2 Periodic functions
2.3 Odd and even functions.
2.4 Fourier series for arbitrary range.
2.5 Half range Fourier series.
3. Laplace transforms (8 hours)
3.1 Laplace transforms.
3.2 Standard L- transforms.
3.3 Inverse laplace transforms.
3.4 Applications.
4 Vector Calculus (7 hours)
4.1 Vector Calculus.
4.2 Differentiation and Integration of Vectors.
4.3 Divergence.
4.4 Gradient curl.
5 Line, surface and volume integrals (18 hours)
5.1 Line integrals.
5.2 Surface and volume integrals.
5.3 Integral transformation theorems- Stoke's, Gauss and Green's theorems.
Textbook
1.0 E. Kreszig, "Advanced Engineering Mathematics", Fifth Edition, Wiley, New York.
2.0 M. M. Guterman and Z.N. Nitecki, "Differential Equations, a First Course", 2nd Edition, Saunders, New York
Tuesday, September 9, 2008
Computer second year, First Part
1) EG501SH Mathematics III
2) EG542CT Computer Programming II
3) EG527EE Electric Circuit II
4) EG532EX Semiconductor Devices
5) EG533EX Logic Circuits
6) EG540CT Basic Computer Concepts
Second Year, First Part (II/I)
2) EG542CT Computer Programming II
3) EG527EE Electric Circuit II
4) EG532EX Semiconductor Devices
5) EG533EX Logic Circuits
6) EG540CT Basic Computer Concepts
Second Year, First Part (II/I)
Subscribe to:
Posts (Atom)