Showing posts with label Civil Engineering. Show all posts
Showing posts with label Civil Engineering. Show all posts

Thursday, September 18, 2008

Project Engineering

Course Objectives
To provide the student with the fundamental concepts of initiating, planning, scheduling and controlling projects.

1.0 Introduction: (3 hours)
1.1 Project definition
1.2 Setting project objectives and goals
1.3 Project phases, project life cycle

2.0 Project Planning and Scheduling: (18 hours)
2.1 Planning function
2.2 Network models - CPM/PERT
2.3 Project scheduling with limited resources
2.4 Wiest's algorithms
2.5 Manpower leveling
2.6 Multiproject scheduling
2.7 Materials scheduling
2.8 Mathematical programming for minimum cost or maximum project return (simplex technique for linear programming)

3.0 Project Monitoring and Control: (10 hours)
3.1 Systems of control
3.2 Project control cycle
3.3 Feedback control systems
3.4 Cost control
3.5 Work breakdown structure
3.6 Introduction to project management information systems

4.0 Capital Planning and Budgeting: (10 hours)
4.1 Capital planning procedures
4.2 Preparation of operating budgets
4.3 Fixed and flexible budgets
4.4 Introduction to budgetary control

5.0 Impact Analysis: (4 hours)
5.1 Social impact analysis
5.2 Environmental impact analysis
5.3 Economic impact analysis

Textbook:
1.0 Arnold M. Ruskin and W. Eugene Estes, "Project Management", Marcel Dekker Publishers, 1982.
2.0 Joseph J. Moder and Cecil R. Phillips, "Project Management with CPM and PERT", Van Nostrand Reinhold Publishers, Latest Edition.
References:
1.0 L. S. Srinrat, "Pert and Application", East-West Press.
2.0 A. Bhattacharya and S. K. Sorkhel, "Management by Network Analysis", The Institution of Engineers (India).
3.0 Prasanna Chandra, "Projects: Preparation, Appraisal, Implementation", Tata McGraw-Hill Publishing Company Ltd., New Delhi.

Monday, September 15, 2008

Probability and Statistics

Course Objectives
To provide the student with a practical knowledge of the principles and concepts of probability and statistics and their application to simple engineering problems.

1. Introduction and Descriptive Statistics: (4 hours)
1.1. An overview of probability and statistics
1.2. Pictorial and tabular methods in descriptive statistics
1.3. Measures of location: mean, median, quartiles, percentiles, etc.
1.4. Measures of variability

2. Probability: (4 hours)
2.1. Sample spaces and events
2.2. Axioms, interpretations and properties of probability
2.3. Counting techniques
2.4. Conditional probability
2.5. Independence

3. Discrete Random Variables and Probability Distributions: (6 hours)
3.1. Random variables
3.2. Probability distributions for random variables
3.3. Expected values of discrete random variables
3.4. The binomial probability distribution
3.5. The hypergeometric and negative binomial distributions
3.6. The Poisson probability distribution

4. Continuous Random Variables and Probability Distributions: (6 hours)
4.1. Continuous random variables and probability density functions
4.2. Cumulative distribution functions and expected values
4.3. The Normal Distribution
4.4. The Gamma Distribution
4.5. Chi-Squared Distribution

5. Joint Probability Distributions and Random Samples: (4 hours)
5.1. Jointly distributed random variables
5.2. Expected values, covariance and correlation
5.3. Sums and averages of random variables
5.4. The central limit theorem

6. Point Estimation: (2 hours)
6.1. Some general concepts of point estimation
6.2. Methods of point estimation

7. Interval Estimation: (3 hours)
7.1. Basic properties of Confidence Interval
7.2. Large-sample Confidence interval for population Mean and Proportion
7.3. A Confidence intervals for the mean of Normal Population
7.4. Confidence interval for the Variance and Standard Deviation of a Normal Population

8. Hypothesis Testing Procedures Based on a Single Sample: (5 hours)
8.1. Hypothesis and Test Procedure
8.2. Tests about the mean of a Normal Population
8.3. Large-sample Test for population mean
8.4. Large-sample Test for a population proportion
8.5. The t-test
8.6. Some comments on selecting a test procedure

9. Hypothesis Testing Based on Two Samples: (4 hours)
9.1. z-tests for differences between two population means
9.2. The sample t-test
9.3. Analysis of paired Data
9.4. Testing for differences between population proportions

10. Simple Linear Regression and Correlation: (4 hours)
10.1. The simple linear probabilistic model and principle of least square
10.2. Correlation, Correlation coefficient and coefficient of determination
10.3. Linear and non-linear Regression
10.4. Line of Regression and coefficient of Regression

11. The Analysis of categorical Data: (3 hours)
11.1. Goodness of Fit tests when category Probabilities are completely specified
11.1.1. Goodness of fit for composite Hypothesis
11.1.2. Two way contingency Tables

Textbook:
1.0 Jay L. Devore, “Probability and Statistics for Engineering and the Sciences”, Brooks/Cole publishing Company, Monterey, California, 1982.

Reference Book:
11 Murray R. Spiegel, "Theory and Problems of Probability and Statistics", McGraw Hill, Singapore
12 D. C. Sancheti and V. K. Kapoor, "Statistics", Sultan Chand and Sons, Educational Publishers, India
13 S. C. Gupta, "Fundamental of Statistics", Himalaya Publishing House, India
14 Jeetendra P. Aryal and Arun Gautam, "Quantitative Technique Vol. II", Vidhyarthy Pustak Bhandar, Nepal
15 S. C. Gupta and V. K. Kapoor, "Fundamentals of Mathematical Statistics", Sultan Chand & Son, India

Engineering Economics

Course Objectives
To provide a knowledge of the basic tools and methodology of economic studies for evaluating engineering projects in private industry, in the public sector and in the utilities area.

1.0 Introduction (3 hours)
1.1 Essential business and accounting terminology
1.2 Definition of cash flow
1.3 Economic systems

2.0 Cost Classification and Analysis (5 hours)
2.1 The elements of cost
2.2 Classification of cost: overhead cost, prime cost
2.3 Cost variance analysis
2.4 Job and process costing

3.0 Interest and the Time Value of Money (6 hours)
3.1 Simple interest, compound interest, interest tables, interest charts
3.2 Present worth
3.3 Nominal and effective interest rates
3.4 Continuous compounding and continuous compounding formula
3.5 Interest calculations for uniform gradient

4.0 Basic Methodologies of Engineering Economic Studies (7 hours)
4.1 Present worth and annual worth methods
4.2 Future worth method
4.3 Internal rate of return method
4.4 Drawbacks of the internal rate of return method
4.5 External rate of return method
4.6 Minimum attractive rate of return method
4.7 The payback (payout) period method

5.0 Cost/Benefit Analysis (4 hours)
5.1 Conventional cost/benefit ratio
5.2 Modified cost/benefit ratio
5.3 Breakeven analysis

6.0 Investment Decisions: (8 hours)
6.1 Comparison of alternatives having same useful life
6.2 Comparison of alternatives having different useful life
6.3 Comparison of alternatives including or excluding the time value of money
6.4 Comparison of alternatives using the capitalized worth method
6.5 Definition of mutually exclusive investment alternatives in terms of
combinations of projects
6.6 Comparison of mutually exclusive alternatives

7.0 Risk Analysis: (4 hours)
7.1 Projects operating under conditions of certainty
7.2 Projects operating under conditions of uncertainty
7.3 Decision tree
7.4 Sensitivity analysis

8.0 Taxation System in Nepal: (3 hours)
8.1 Taxation law in Nepal
8.2 Depreciation rates for buildings, equipment, furniture, etc.
8.3 Recaptured depreciation
8.4 Taxes on normal gains
8.5 Taxes on capital gains

9.0 Demand Analysis and Sales Forecasting (5 hours)
9.1 Demand analysis
9.2 Correlation of price and consumption rate
9.3 Multiple correlation of price and consumption rate
9.4 Market research
9.5 Sales forecasting
9.6 Criteria for desirable sales forecasting procedures
9.7 Factors affecting accuracy of forecasting

Tutorials: 3 Assignments, 2 Quizzes, 3 Case Studies

Note:
The case studies will concentrate on economic analysis and selection of public projects, economic analysis and selection of private projects, risk analysis and demand analysis.

Textbook:
1.0 E. P. DeGramo, W. G. Sullivan and J. A. Bontadelli, 8th Edition, Macmillan publishing Company, ,1988.

References:
1.0 N. N. Borish and S. Kaplan, "Economic Analysis: For Engineering and Managerial Decision Making", McGraw-Hill.

Communication II (English)

Course Description:
This course is designed for the B. E. Level I year II part students of Civil, Mechanical and III
year I part students of Electrical, Electronics and Computer. It intends to develop and
strengthen in students the communication skills in the English language with emphasis on
writing, reading and speaking.

Course Objectives:
This course intends to develop skills in:
- understanding and using varieties of English.
- public speaking and mass communication.
- preparing and conducting meeting.
- faster / extensive reading.
- writing description, technical talk, seminar paper.
- writing technical reports.

1. Varieties of English: (1 hour)
1.1 British / American.
1.2 Formal / Informal.
1.3 Spoken / Written.
1.4 Polite / Familiar and Impersonal.

2. Mass communication:
2.1 Presentation of talk
2.2 Presentation of seminar paper.
2.3 Conduction of meeting.

3. Extensive reading (4 hours)
3.1 Scanning
3.2 Skimming

4. Writing (10 hours)
4.1 Writing description: Landscape, technical processes, mechanical / electrical
objects, maps, graphs, charts.
4.2 Preparing note and writing talk.
4.3 Writing seminar paper
4.4 Writing agenda, minute and notice.
4.5 Writing technical reports.

Evaluation Scheme:
A) Internal Assessment:
Report writing - 4 marks
Technical talk / Seminar paper or meeting - 4 marks
Attendance - 2 marks
Total: 10 marks

B) Semester Exam:
Varieties - 4 marks
reading - 8 marks
Description writing - 4 marks
Seminar paper / talk - 8 marks
Meeting - 6 marks
Report writing - 10 marks

Total: 40 marks
Total (A + B) 50 marks

Reference Books:
1.0 Anne Eisenberg, "Effective Technical Communication", McGraw - Hill. 1982.
2.0 K. W. Hope and T.E. Pearsall, "Reporting Technical Information", 5th Edition Macmillan Publishing Company, New York, 1984.

Numerical Methods

Course Objectives
To present the theory of numerical computational procedures for solving engineering problems. Solution of ordinary and partial differential equations will be included.

1.0 Solution of Nonlinear Equations: (10 hours)
1.1 Review of calculus, continuity, differentiability, intermediate value theorem, Taylor’s theorem
1.2 Absolute, relative, and round off errors, error bounds for computational errors
1.3 Bisection method, its error bounds and convergence
1.4 Newton’s method, secant method and their convergence
1.5 Fixed point iteration, its convergence properties,
1.6 Zeros of polynomials by Horner’s method

2.0 Interpolation and Approximation: (10 hours)
2.1 Taylor’s polynomial approximation, Lagrange’s interpolation
2.2 Newton’s interpolation and divided differences
2.3 Iterative interpolation
2.4 Cubic spline interpolation
2.5 Least squares method of fitting continuous and discrete data or functions

3.0 Numerical Differentiation and Integration: (5 hours)
3.1 Numerical differentiation formulas
3.2 Newton-Cote’s numerical integration formulas, composite numerical integration
3.3 Romberg integration algorithm
3.4 Gaussian integration formulas

4.0 Linear Algebraic Equations: (10 hours)
4.1 Review of the properties of matrices
4.2 Matrix form of Gaussian elimination, pivoting strategies, ill-conditioning
4.3 Cholesky’s and related algorithms for matrix factorization
4.3 Eigen values and eigen vectors and the power method

5.0 Solution of ordinary Differential Equations: (7 hours)
5.1 Euler’s method for solving ordinary differential equations of 1st order and other related methods
5.2 Runge-Kutta methods
5.3 Extension to higher order equations
5.4 Initial value problems
5.5 Boundary value problems
6.0 Solution of partial Differential Equations: (3 hours)
6.1 Introduction to the solution of partial differential equations
6.2 Engineering examples

Reference Books:
1.0 W. Cheney and D. Kincaid, “Numerical Mathematics and computing”, Edition, Brooks/Cole publishing Co.,1985.
2.0 C.F. Gerald and P. O. Wheatley, “Applied Numerical Analysis”, 4th Edition, Addison-Wesley Publishing Company, New York.
3.0 S. Yakowitz and F. Szidarovszky, “An Introduction to Numerical Computations”, 2nd Edition, Macmillan publishing Co., New York.

Reference Book for Programs in C:
1.0 W.H. press, B. P. Flannery et. al., “Numerical Recipes in C”, 1st Edition, Cambridge Press,1988.

Sunday, September 14, 2008

Electronic Circuits I

COURSE OBJECTIVES
To build on the material presented in Semi Conductor Devices to include the fundamentals of analog integrated circuit (IC) operation. Particular attention will be directed toward understanding operational amplifier operation over the full useful frequency range. Regulated power supplies, power amplifiers and relaxation and sinusoidal oscillators will be discussed.

1.0 Integrated Circuit Technology and Device Models: (10 hours)
1.1 The planar process for integrated circuit fabrication
1.2 Review of dc and ac diode models
1.3 Review of dc and ac JFET models
1.4 Review of dc and ac bipolar transistor models
1.5 Review of dc and ac MOS transistor models

2.0 Operational Amplifier Circuits: (8 hours)
2.1 Bias circuits suitable for IC design
2.2 The widlar currant source
2.3 The differential amplifier
2.4 Active loads
2.5 Output stages

3.0 Operational Amplifier Characterization: (6 hours)
3.1 Input offset voltage
3.2 Input bias and input offset currents
3.3 Output impedance
3.4 Differential and common-mode input impedances
3.5 DC gain, bandwidth, gain-bandwidth product
3.6 Common-mode and power supply rejection ratios
3.7 Higher frequency poles, settling time
3.8 Slew rate
3.9 Noise in operational amplifier circuits

4.0 Power Supplies and Voltage Regulators: (6 hours)
4.1 Half-wave and full-wave rectifiers
4.2 Capacitive filtering
4.3 Zener diodes, bandgap voltage references, constant current diodes
4.4 Zener diode voltage regulators
4.5 Series transistor-zener diode voltage regulators
4.6 Series transistor-zener diode-constant current diode voltage regulators
4.7 Voltage regulators with feedback
4.8 IC voltage regulations

5.0 Untuned and Tuned Power Amplifiers: (7 hours)
5.1 Amplifier classification
5.2 Direct-coupled push-pull stages
5.3 Transformer-coupled push-pull stages
5.4 Tuned power amplifiers
5.5 Power dissipation considerations

6.0 Oscillator Circuits: (8 hours)
6.1 CMOS inverter relaxation oscillator
6.2 Operation amplifier based relaxation oscillators
6.3 Voltage-to-frequency converters
6.4 Sinusoidal oscillators
6.5 Conditions for oscillators
6.6 Amplitude and frequency stabilization
6.7 Swept frequency oscillators
6.8 Frequency synthesizers
6.9 Function generators

Laboratory:
1.0 Study of a discrete component operational amplifier realization.
2.0 Commercial operational amplifier characterization.
3.0 Regulated power supplies
4.0 Power amplifiers
5.0 Relaxation oscillators
6.0 Sinusoidal oscillators

Reference Books:
1) W. Stanely “operational Amplifiers with Linear Integrated circuits”, Charles E. Merrill publishing company, Toronto,1984.
2) J. G. Graeme, “Application of operational Amplifiers: Third Generation Techniques” The burr-Brown Electronic series”, McGraw-Hill, New York, 1973.
3) P. E. Allen and D. R. Holberg, “CMOS Analog Circuit Design”, Holt, Rinehart and Winston, Inc., New York, 1987.
4) A. S. Sedra and K. C. Smith, “Microelectronic Circuits”, 2nd Edition, Holt, Rinehart and Winston, Inc., New York,

Applied Mathematics

Course objectives
This course focuses on several branches of applied mathematics. The student is exposed to complex variable theory and a study of the Fourier and Z transforms, topics of current importance in signal processing. The course concludes with studies of the wave and diffusion equations in cartesian, cylindrical and polar coordinates.

1. Complex Variables (10 hours)
1.1 Function of Complex Variables.
1.2 Taylor series.
1.3 Laurent series.
1.4 Singularities, Zeros and poles.
1.5 Complex integration
1.6 Residues.

2 Z-Transforms (8 hours)
2.6 Linear, time invariant systems, response to the unit spike
2.7 Delay, advance, convolution
2.8 Definition of the Z-transform
2.9 Relation of convolution to the product of transform
2.10 Region of convergence, relationship to causality
2.11 Inverse of the Z-transform by long division and by partial fraction expansion
2.12 Parseval’s theorem

3 The Fourier integral (8 hours)
3.1 The Fourier integral
3.2 The inverse Fourier integral formula.
3.3 Frequency and phase spectra.
3.4 The delta function.

4 Partial differential equations (10 hours)
4.1 Basic concepts.
4.2 Wave equation.
4.3 Diffusion equation.
4.4 The Laplace equation in 2 and 3 dimensions.
4.5 Polar coordinates.
4.6 Cylindrical coordinates.
4.7 Spherical coordinates.
4.8 Bessels and Legendre equations.

5. Linear Programming (9 hours)
5.1 The simplex method.
5.2 The canonical forms of solutions.
5.3 Optimal values.

Textbook:
1.0 E. Kreyszig, “Advanced Engineering Mathematics”, Fifth Edition, Wiley, New York.

Reference for Z-Transform:
1.0 A.V. Oppenheim, “Discrete-Time Signal Processing”, Prentice Hall, 1990.
2.0 K. Ogota, “Discrete-Time Control Systems”, Prentice Hall, Englewood Cliffs, New Jersey,

Mathematics III

COURSE OBJECTIVES
The purpose of this course is to round out the student's preparation for more sophisticated applications with an introduction to linear algebra, a continuation of the study of ordinary differential equations and an introduction to vector calculus.

1. Matrices and determinants (8 hours)
1.1 Matrix and determinants.
1.2 Vector spaces
1.3 Linear transformations
1.4 System of linear equations, Gauss elimination.
1.5 Rank, matrix inversion.
1.6 Eigen values, eigen vectors.

2 Fourier series (4 hours)
2.1 Fourier series,
2.2 Periodic functions
2.3 Odd and even functions.
2.4 Fourier series for arbitrary range.
2.5 Half range Fourier series.

3. Laplace transforms (8 hours)
3.1 Laplace transforms.
3.2 Standard L- transforms.
3.3 Inverse laplace transforms.
3.4 Applications.

4 Vector Calculus (7 hours)
4.1 Vector Calculus.
4.2 Differentiation and Integration of Vectors.
4.3 Divergence.
4.4 Gradient curl.

5 Line, surface and volume integrals (18 hours)
5.1 Line integrals.
5.2 Surface and volume integrals.
5.3 Integral transformation theorems- Stoke's, Gauss and Green's theorems.


Textbook
1.0 E. Kreszig, "Advanced Engineering Mathematics", Fifth Edition, Wiley, New York.
2.0 M. M. Guterman and Z.N. Nitecki, "Differential Equations, a First Course", 2nd Edition, Saunders, New York

Tuesday, September 9, 2008

Engineering Drawing II

COURSE OBJECTIVES: To continue ENGINEERING DRAWING I to the point of producing intelligible working drawings.

1.0 Pictorial Drawings: (12 hours)
1.1 Introduction: Characteristics, advantages and disadvantages
1.2 Axonometric Projection: Isometric, Diametric and trimetric drawing
1.3 Oblique projection
1.4 Perspective projection

2.0 Design and Production Drawings-Machine Drawings: (12 hours)
2.1 Introduction: Production of complete design and assembly drawings
2.2 Fundamental techniques
Size and location dimensioning
Placement of dimension lines and general procedures
Standard dimensioning practice (SI system)
2.3 Limit Dimensioning
Nominal and basic size, allowance, tolerance, limits of size, clearance fit,
interference fit
Basic hole system and shaft systems
2.4 Threads and Standard Machine Assembly Elements
Screw threads: ISO standards, representation and dimensioning
Fasteners: Types and drawing representation
Key, collars, joints, springs bearings
2.5 Assembly Drawings
Drawing layout, bill of materials, drawing numbers

3.0 Welding and Riveting: (4 hours)
3.1 Representing Joints and Welds for Gas, Arc and Resistance Welding
Types: spot, seam, flash, fillet, back-back, surface and upset welds
3.2 Drawing symbols for welds
3.3 Rivets and riveted joints
Types and drawings representation

4.0 Piping Diagrams: (4 hours)
4.1 Piping, Tubing and Types of Joints
4.2 Specification of Threads, Fittings and Valves
4.3 Standard Piping Symbols
4.4 Piping Drawings and Symbolic Diagrams

5.0 Structural Drawings: (8 hours)
5.1 Steel Construction
Structural steel shapes
Bolted, welded and riveted connections
Detailing practices for structural steel
5.2 Wood Construction
Timber connections and bolted joints
Detailing practice
5.3 Concrete Construction
Slab and beam configurations
Steel reinforcement and prestressing
5.4 Masonry and Stone Construction

6.0 Electrical and Electronic Diagrams: (8 hours)
6.1 Standards
6.2 Types of Diagrams: Line diagrams, schematics and pictorials
6.3 Symbols for Components
6.4 Printed Circuits
6.5 Integrated Circuits

7.0 Topographical Drawings: (4 hours)
7.1 Topographical Maps
7.2 Cadastral Maps
7.3 Engineering Maps

8.0 Graphs, Charts and Nomograms: (4 hours)
8.1 Rectangular Coordinate Graphs
8.2 Charts
8.3 Nomograms

9.0 Reproduction and Duplicating of Engineering Drawings: (4 hours)
9.1 Blue Prints, Brown Prints and Blue-Line Prints
9.2 Ozalid Prints, Black and White (Diazo Prints)
9.3 Xerox Prints
9.4 Duplicate Tracings
9.5 Photocopies
9.6 Microfilming
9.7 Glass Cloth for Layouts

Texts and/or References:
1. "Fundamentals of Engineering Drawing", W.J. Luzadder, Prentice Hall, 8th Edition, 1981
2. "Engineering Drawing and Graphic Technology", T.E. French, C.J. Vierck and R.J. Foster, McGraw Hill, 1981
3. "Technical Drawing", F.E. Giesecke, A. Mitchell, H. C. Spencer and J. T. Dygdone, Macmillan, 8th Edition, 1986

LABORATORIES: 3 hr/week, 12 weeks
1. Isometric and Oblique Drawings
2. Oblique Drawing
3. Perspective Drawing
4. Machine Drawings; Sizing and dimensioning
5. Machine Drawings; Detail drawings, dimensioning and tolerancing
6. Machine Drawing; Assembly drawing
7. Threads and Fasteners
8. Welding, Jointing and Piping
9. Structural Drawing
10. Structural Drawing (cont.)
11. Electrical and Electronics Diagrams
12. Electrical and Electronics Diagrams (cont.)
13. Topographical and Engineering Maps
14. Graphs, Charts and Nomograms
1.5. Drawing Reproduction and Duplication

Electrical Engineering Materials

COURSE OBJECTIVES:
To provide a basic understanding of the electric and magnetic properties of materials used in electrical and electronics engineering.

1.0 Theory of Metals: (6 hours)
1.1 Elementary quantum mechanical ideas
1.2 Free electron theory
1.3 Energy well model of a metal
1.4 Density of states function
1.5 The Fermi-Dirac distribution function
1.6 Thermionic emission
1.7 Work function
1.8 The Fermi level at equilibrium, contact potentials

2.0 Free Electron Theory of Conduction in Metals: (6 hours)
2.1 Thermal velocity of electrons at equilibrium
2.2 Lattice scattering, mean free time between collisions
2.3 Drift velocity of electrons in an electric field
2.4 Diffusion of electrons, diffusion coefficient, Einstein’s relationship between mobility and diffusion coefficients
2.5 Chemical and physical properties of common conducting materials such as Au, Ag, Cu, Al, Mn, Ni, etc.

3.0 Conduction in Liquids and Gases: (2 hours)
3.1 Ionic conduction in electrolytes
3.2 Electrical conduction in gases
3.3 Arc discharges, electric breakdown

4.0 Dielectric Materials: (6 hours)
4.1 Macroscopic effects
4.2 Polarization, dielectric constant
4.3 Dielectric losses, frequency and temperature effects
4.4 Dielectric breakdown
4.5 Ferroelectricity and piezoelectricity
4.6 Properties of common dielectrics such as glass, porcelain, polyethylene, pvc, nylon, bakelite, rubber, mica, transformer oils, etc.

5.0 Magnetic Materials: (8 hours)
5.1 Ferromagnetism, ferrimagnetism, paramagnetism
5.2 Domain structure
5.3 Hysterisis loop, eddy current losses
5.4 Soft magnetic materials
5.5 Fe-si alloys, Ni-Fe alloys
5.6 Ferrites for high frequency transformers
5.7 Square loop materials for magnetic memory, relaxation oscillators
5.8 Hard magnetic materials such as carbon steels, Alnico alloys and barium ferrites

6.0 Semiconducting Materials: (12 hours)
6.1 Band structure of Group IV materials, energy gap
6.2 Density of states function
6.3 Fermi-Dirac distribution function
6.4 Hole and electron densities in an intrinsic crystal
6.5 Effective densities of states, intrinsic concentration
6.6 Fermi level of energy at equilibrium
6.7 Group III and Group IV impurities, acceptors and donors, p and n-type materials
6.8 Energy band diagrams for uniformly-doped and graded p- and n-type materials
6.9 Generation and recombination of electrons and holes, concept of lifetime
6.10 Mobility and diffusion coefficients for electrons and holes in semi conductors
6.11 Transport and continuity equations for electrons and holes
6.12 Concept of diffusion length
6.13 Energy band diagram for a p-n junction, contact potentials
6.14 Metal-semiconductor contacts
6.15 Brief introduction to Crystallography/metallurgy (Phase diagram, transport phenomenon)

7.0 Semiconductor Materials Processing: (5 hours)
7.1 Crystal growing
7.2 Doping by solid state diffusion, ion implantation
7.3 Oxidation
7.4 Photolithography the planar process
7.6 Metallization contacts

Textbooks:
1.0 R.A. Colcaser and S.Diehl-Nagle, “Materials and Devices for Electrical Engineers and Physicists, McGraw-Hill, New York, 1985.
2.0 R.C. Jaeger, “Introduction to Microelectronic Fabrication- - Volume IV”, Addison- Wesley publishing Company, Inc.,1988.

Chemistry

COURSE OBJECTIVES
To develop the basic concepts of Physical Chemistry, Inorganic Chemistry and Organic Chemistry relevant to problems in engineering.


Group A (Physical Chemistry )

1.0 Atomic Structure (5 hours)
1.1 Limitations of Bohr's Theory
1.2 Sommerfeld's extension of Bhor model of atom ( no derivation) Wave mechanical model of atom
1.3 De-Broglee's equation, matter waves and electromagnetic waves
1.4 Heisenberg's uncertainty principle, uncertainty principle and probability Concept.
1.5 Derivation of Schrodinger's equation (time Independent), significance of wave function, quantum numbers and orbital, radial and angular probability distribution graphs and shapes of s, p, d orbitals.
1.6 Pauli's exclusion principle, Hund's rule of maximum multiplicity aufbau principle, electronic configuration using s, p, d, f orbitals, stability of half filled and completely filled orbitals.

2.0 Ionic equilibrium (4 hours)
2.1 Strong and weak electrolytes
2.2 Ostwald's dilution law and its limitation
2.3 pH and pH scale
2.4 Common ion effect in ionic equilibria.
2.5 Buffer and pH of buffer

3.0 Electro Chemistry (4 hours)
3.1 Electrolytic cells and Galvanic cells
3.2 Single electrode potentials and normal hydrogen electrode, elctro-chemical series
3.3 Nernst's equation and determination of electrode potential and cell potential under non-standard conditions
3.4 Corrosion of metals and its prevention.

4.0 Chemical energetics (5 hours)
4.1 Internal energy (E) and I law of thermodynamics.
4.2 Isothermal irreversible expansion of an ideal gas, isothermal reversible expansion of an ideal gas.
4.3 Experimental determination of E(using bomb Calorimeter)
4.4 Enthalpy (H) and experimental determination of H.
4.5 Enthalpy of Physical and Chemical changes
4.6 Hess's law of constant heat summation
4.7 Enthalpy change from bond energy
4.8 Molar heat Capacities, relation between Cp and Cv
4.9 Variation of heat of reaction with temperature ( Kirchhoff's equations)
4.10 Calorific values of fuels and food.


Group B (Inorganic Chemistry)

5.0 Chemical Bonding (4 hours)
5.1 Valence bond theory
5.2 A brief treatment of the Covalent bond with valence bond theory.
5.3 Types of overlapping
5.4 Hybridization
5.5 Condition necessary for hybridization
5.6 Characteristic of hybrid orbitals
5.7 Types of hybridization - Sp, Sp2, Sp3, dsp2, dsp3 and d2Sp3

6.0 Co-ordination Complexes (5 hours)
6.1 Double Salt and complex Salt
6.2 Werner's Co-ordination theory
6.3 Nomenclature of Co-ordination Complexes.
6.4 Electronic interpretation in Co-ordination.
6.5 Bonding in Co-ordination compounds - only valence bond theory.
6.6 Applications of valence bond theory - Octahedral complexes, Tetrahedral
complexes and Square planer complexes.
6.7 Application of Co-ordination complexes.

7.0 Transition elements - 3rd Series, with reference to (5 hours)
7.1 Electronic configuration.
7.2 Metallic character
7.3 Oxidation State
7.4 Colour formation
7.5 Magnetic properties
7.6 Tendency to form complexes.

8.0 Silicones - Properties and uses (1 hour)


Group C (Organic Chemistry)

9.0 Stereochemistry (3 hours)
9.1 Stereoisomerism
9.2 Geometrical isomerim
9.3 Optical Isomerisum

10.0 Four general types of organic reactions (4 hours)
10.1 Substitution reaction SN
1 and SN
2 reaction
10.2 Addition
10.3 Elimination E1 and E2 reactions
10.4 Rearrangement.

11.0 Organometallic compounds (1 hours)
Preparation of Grignard's reagent, properties and uses

12.0 Aromatic Compounds (1 hours)
Toluene- preparation, Properties and uses

13.0 Explosives (2 hours)
13.1 Simple idea about low and high explosives.
13.2 TNT, TNG and nitrocellulose preparation and uses

14.0 Plastics and Polymers (3 hours)
14.1 Polymers and Polymerization.
14.2 Types of Polymerization reaction.
14.3 Types of Polymers
14.4 Synthetic fibres Polystyrene, Teflon, nylon, terylene or dacron.


Text books and References.

Physical Chemistry:
Text:
1. Selected topics in physical chemistry. - Motikaji Sthapit
References:
1. Principles of physical chemistry - Marron & Prutton.
2. Essentials of physical chemistry. - Bahl & Tuli

Inorganic chemistry:
Text:
1. Advanced Inorganic chemistry - Satyaprakash, R. D. Modan., G.D. Tuli
References:
1. Concise Chemistry - A.J. Lee
2. Inorganic chemistry - R. C. Agrawal.

Organic chemistry:
Text:
1. Organic chemistry. - Morrison and Boyd
References:
1. Organic chemistry - B. S. Bahl
2. Mechanism in organic chemistry - Peter Sykes.

Chemistry Laboratory F M:25
EG403SH Internal: 10
External: 15
1. To determine the alkalinity of water samples A&B.
2. To determine the hardness of water Complexometrically using EDTA.
3. To determine the amount of free chlorine in water by Standardization of hypo Solution.
4. To prepare the standard buffer solutions using acetic acid & sodium acetate and to
measure the approximate pH of the given unknown solution by universal indicator
method.
5. To prepare the standard buffer solutions using ammonia and ammonium chloride and to
measure the approximate pH of the given unknown solution by using universal indicator.
6. To determine the relative and absolute viscosity of the given liquids by ostwald's
Viscometer.
7. To find the surface tension of the liquids by stalagmometer and compare surface tension
of the cleaning powder of detergents.
8. To measure the quantity of electricity required to deposit one mole of Copper.
9. To purify petroleum and crude alcohol by fractional distillation.

Mathematics II

Course Objectives
It is assumed that students have taken Mathematics I or an equivalent introduction to calculus as a prerequisite. Major topics to be covered are
(a) two and three-dimensional vectors and some associated linear algebra
(b) infinite series
(c) first order differential equations.

1. Plane curves and Polar coordinates. (4 hours)
1.1 Plane curves.
1.2 Parametric equations.
1.3 Polar coordinates.
1.4 Integrals in Polar Coordinates.

2. Calculus of Several Variables. (6 hours)
2.1 Calculus of two or more variables.
2.2 Partial derivatives.
2.3 Total differential coefficients.
2.4 Extrema of functions of two or three variables.

3. Multiple integrals. (4 hours)
3.1 Multiple integrals.
3.2 Uses in areas.
3.3 Volumes.
3.4 Centroids.

4. Analytic Geometry of 3-D (7 hours)
4.1 Analytic Geometry of three dimensions-planes.
4.2 Straight lines.
4.3 Standard equations of sphere.
4.4 Cylinder and cone.

5. Infinite series (9 hours)
5.1 Infinite series and sequences.
5.2 Convergence
5.3 Ratio, root, integral tests.
5.4 Absolute convergence
5.5 Power series.
5.6 Radius of convergence.

6. Vectors in two and three dimensions (5 hours)
6.1 Two and three dimensional Vectors.
6.2 Scalar products.
6.3 Vector products
6.4 Linesand planes.

7. Ordinary Linear differential equations (10 hours)
7.1 Homogeneous Linear differential equations of second order.
7.2 General solution.
7.3 Initial value problems.
7.4 Non homogeneous equations.
7.5 Solution in series, Legendre, Bessel equations.

Textbook:
1.0 E.W. Swokowski, "Calculus With Analytic Geometry", Second Alternate Edition, PWS-Kent Publishing Co., Boston.

Reference Books:
1.0 E. Kreyszig, "Advance Engineering Mathematics", Fifth Edition, Wiley, New York.

Thermodynamics, Heat and Mass Transfer

Course objective
To provide the student with a basic understanding of thermodynamics, heat transfer and fluid flow.

1.0 Introductory Concepts: (2 hours)
1.1 The nature of thermodynamics
1.2 Concepts from mechanics and electromagnetics
1.3 Dimensional and unit systems
1.4 Energy and units

2.0 Energy and the First Law: (3 hours)
2.1 Systems and energy conservation
2.2 Energy transfer as work
2.3 Energy transfer as heat
2.4 Energy balance for a control mass, examples for no flow and steady flow systems

3.0 Properties and States of Substances: (4 hours)
3.1 Simple substances and equations of state
3.2 General nature of a compressible substance
3.3 Metastable states in phase transition
3.4 Physical properties data and engineering analysis
3.5 Other thermodynamic properties
3.6 The perfect gas
3.7 The simple magnetic substance

4.0 Energy Analysis: (2 hours)
4.1 General methodology
4.2 Examples of control mass energy analysis
4.3 Examples of control volume energy analysis

5.0 Entropy and Second Law: (3 hours)
5.1 The essential concept of entropy
5.2 Reversible and irreversible processes
5.3 Entropy as a function of state
5.4 Applications to energy conversion systems

6.0 Characteristics of Some Thermodynamic Systems: (3 hours)
6.1 The carnot cycle
6.2 Process models
6.3 Use of the Rankine cycle
6.4 Vapour refrigeration systems
6.5 Power systems

7.0 Introduction to Heat Transfer: (2 hours)
7.1 Basic concepts and models of heat transfer
7.2 The conduction rate equation and heat transfer coefficient
7.3 Conduction: insulation, R values, electric analogies; overall coefficient for plane walls, cylinders and fins; conduction shape factor; transient heat conduction
7.4 Free and forced convection: laminar and turbulent boundary layers; flat plates, tubes and fins; cross flow and application to heat exchangers
7.5 Radiation: radiation properties for black and gray bodies; applications; earth atmosphere system; radiant heating systems
7.6 Heat transfer applications in electronics and electrical engineering: finned heat sinks for electronic applications, forced air cooling of electronic instrumentation, cooling of electric equipment such as transformers, motors, generators, power converters

8.0 Fluid Properties and Definitions: (2 hours)
8.1 Definition of a fluid
8.2 Viscosity
8.3 Density, specific gravity, specific volume
8.4 Bulk modulus
8.5 Surface tension

9.0 Fluid Statics: (3 hours)
9.1 Pressure variation in static fluids
9.2 Pressure measurement, units and scales
9.3 Forces on plane and curved submerged surfaces
9.4 Buoyant force
9.5 Stability of floating and submerged bodies

10.0 Fluid Flow Concepts and Basic Equations: (4 hours)
10.1 Types of flow and definitions
10.2 The continuity equation
10.3 Streamlines and the potential function
10.4 The Bernoulli energy equation
10.5 The momentum equation
10.6 Applications

11.0 Viscous Flow: (3 hours)
11.1 Turbulent and laminar flow, Reynold’s number
11.2 Velocity distribution
11.3 Boundary layer concepts
11.4 Drag on immersed bodies
11.5 Resistance to flow in open and closed conduits
11.6 Pressure losses in pipe flow

12.0 Turbomachinery: (4 hours)
12.1 Geometrically similar (homologous) machines
12.2 Performance equations for pumps and turbines
12.3 Configurations and characteristics of turbomachines, axial and centrifugal pumps and blowers, impulse turbines (pelton), reaction turbines (Francis, Kaplan)
12.4 Cavitation

Laboratory: Selected fundamental laboratory experiments from the facilities for
thermodynamics, heat transfer and fluid mechanics. In some cases, two
laboratory exercises are to be completed in one three hour period.
1.0 Temperature and pressure measurement.
2.0 Compression and expansion of gases and heat equivalent of work.
3.0 Heat conduction and convection.
4.0 Refrigerator and/or heat pump.
5.0 Hydrostatics and properties of fluids, viscous flow in pipes.
6.0 One of: Air flow studies in axial and centrifugal fans Turbomachines: Kaplan, Pelton and Francis types.

Textbooks and References:
1.0 W.C. Reynolds, “Engineering Thermodynamics”, McGraw-Hill, 2nd Edition, 1970.
2.0 V.M. Faires, “Thermodynamics”, Macmillan.
3.0 M.N. ozisik, “Heat Transfer - A Basic Approach”, McGraw-Hill, 1985.
4.0 de Witt, “Fundamentals of Heat and Mass Transfer”, Wiley 1985.
5.0 Saberski, Acosta and Hauptmann, “Fluid Mechanics”.
6.0 V.L. Streeter, Acosta and Hauptmann, “Fluid Mechanics”, Latest Edition, McGraw Hill.

Applied Mechanics

Course Objectives
To develop an understanding of mechanical equilibrium and of Newton’s laws of motion by application to a wide range of problems of engineering interest.

1.0 General Principles of Statics (1 hour)
1.1 Concept of equilibrium of particles
1.2 Fundamental quantities of length, time and mass
1.3 SI system of units
1.4 Significant figures for calculations

2.0 Vectors (1 hour)
2.1 Force and position vectors
2.2 Vector operations: addition, subtraction, dot product, cross product, scalar and triple product, unit vectors.

3.0 Equilibrium of a particle (2 hours)
3.1 Condition of equilibrium
3.2 Free-body diagrams
3.3 Coplanar force systems; transmissibility, force resultant
3.4 Three-dimensional force systems

4.0 Force System Resultants (2 hours)
4.1 Cross products
4.2 Moment of a force - scalar and vector representation
4.3 Moment of a couple - scalar and vector representation
4.4 Reduction of systems of forces and moments to a single force and couple
4.5 Resultant force and moment for a system of forces

5.0 Equilibrium of a Rigid Body (3 hours)
5.1 Conditions for equilibrium
5.2 Equilibrium in two dimensions; equations, two and three force members
5.3 Equilibrium in three dimensions; equations, constraints for rigid bodies

6.0 Friction (2 hours)
6.1 Laws of friction, static and dynamic coefficients of friction, friction angle
6.2 Application to static problems

7.0 Planar Trusses, Frames and Mechanisms (3 hours)
7.1 Simple trusses
7.2 Types of frames; determinate and indeterminate
7.3 Degrees of freedom; structure or mechanism
7.4 Internal forces from equilibrium; examples for trusses, frames and mechanisms

8.0 Beams (3 hours)
8.1 Classification of beams, loads and supports
8.2 Determining internal shear force, axial force and bending moment at a section

9.0 Fluid Statics (2 hours)
9.1 Distribution of pressure on submerged surfaces
9.2 Centre of pressure and resultant force

10.0 Centre of Gravity and Centroid (2 hours)
10.1 Centres of gravity
10.2 Centroids of lines, areas and volumes
10.3 Second moment of and area

11.0 Moments of Inertia (2 hours)
11.1 Moments of inertia by integration
11.2 Parallel axis theorem
11.3 Moments of inertia of composite areas

12.0 Kinematics of a particle (3 hours)
12.1 Rectilinear and curvilinear motion
12.2 Uniformly accelerated motion
12.3 Projectile motion
12.4 Rectangular, normal and tangential components of acceleration

13.0 Kinetics of a Particle (3 hours)
13.1 Newton’s laws and equations of motion
13.2 Applications using rectangular or normal and tangential components
13.3 Principle of work and energy
13.4 Work, power and efficiency
13.5 Linear impulse and momentum
13.6 Angular impulse and momentum

14.0 Planar Kinematics of a Rigid Body (4 hours)
14.1 Translation, rotation and general plane motion
14.2 Relative velocity and acceleration analysis
14.3 Applications: rigid bodies, simple mechanisms and linkages

15.0 Force Analysis for Rigid Bodies (4 hour)
15.1 Equations of motion
15.2 Need for moments of inertia
15.3 Translation, pure rotation and general plane motion
15.4 Constrained motion in a plane

16.0 Principle of Work and Energy for Rigid Bodies (3 hours)
16.1 Kinetic energy
16.2 Potential energy; gravitational forces and elastic elements
16.3 Conservative and non-conservative systems
16.4 Work by external forces; applied loads, frictional force

17.0 Linear and Angular Impulse and Momentum for Rigid Bodies (3 hours)
17.1 Conservative of linear and angular momentum
17.2 Impulse motion and accentric impact

Textbook:
1.0 F.P. Beer and E.R. Johnson, “Vector Mechanics for Engineers, Statics and Dynamics”, Third Edition, McGraw-Hill
2.0 R.C. Hibbeler, “Engineering Mechanics, statics and Dynamics”, Fifth Edition, MacMillan publishers, New York.
3.0 F.P. Beer and E.R. Johnson, “Mechanics of Materials”, McGraw- Hill, 1981.

Workshop Technology

Course Objectives: To provide instruction and practical workshop experience in
basic machine shop metal-working operations.

1.0 Bench Tools and Basic Hand Operations: (8 hours)
1.1. Familiarization with tools and their use
1.2. Machinist’s hammers
1.3. Types of screw drivers
1.4. Use and sharpening of punches, chisels, chippers and scrapers, scribers
1.5. Classification of files
1.6. Types of pliers and cutters
1.7. Types of wrenches: open end, box end, combination, adjustable, socket, offset, twelve point ratchet, strap wrench, pipe wrench, spanner wrenches, Allen wrenches
1.8. Hacksaws
1.9. Bench vises
1.10. Hand drills
1.11. Taps and dies
1.12. Hand shears
1.13. Rules, tapes and squares
1.14. Soldering and brazing equipment
1.15. Rivet types

2.0 Hand Working Operations: (8 hours)
2.1 Choice of blades and sawing techniques
2.2 Filling to obtain flat and parallel surfaces, square corners, roughing and finishing operations
2.3 Tapping holes and threading rods
2.4 Scribing layout patterns
2.5 Shearing and cutting sheet metal
2.6 Soldering
2.7 Safety
2.8 Riveting
3.0 Power Tools: (4 hours)
3.1 Power hacksaw
3.2 Horizontal cutoff band saw
3.3 Vertical band saw and cutting operations
3.4 Bench and hand-held grinders
3.5 Belt and disk sanders
3.6 Hand-held power drills
3.7 Safety aspects

4.0 Measuring and Gagging: (4 hours)
4.1 Semi-precision tools such as rules, scales, try squares, inside/outside clippers, depth gages, feeler gages
4.2 Precision tools such as micrometers, vernier calipers, vernier height gages, telescoping gages, hole gages, bevel protractors, dial indicators, gage blocks and surface plates

5.0 Drills and Drilling Processes: (4 hours)
5.1 Types of drill presses
5.2 Work holding attachments and accessories
5.3 Cutting tools
5.4 Geometry and grinding of drill bits
5.5 Drilling, countersinking, reaming, lapping
5.6 Cutting speeds
5.7 Safety

6.0 Machine Tools: (12 hours)
6.1 General safety considerations
6.2 Physical construction and types of engine lathes
6.3 Facing and straight turning operations
6.4 Threading
6.5 Tool selection and feed rates
6.5 Horizontal and vertical shapers
6.6 Applications of shapers
6.7 Types and construction of milling machines
6.8 Selection of milling machine cutters and accessories, operations
6.9 Grinding machines
6.10 Horizontal surface grinding
6.11 Plain cylindrical grinding

7.0 Material Properties: (8 hours)
7.1 Tool materials such as low, medium and high carbon steels, hot and cold rolled steels, alloy steels, carbide and ceramic materials
7.2 Heat treating methods for steels: hardening, tempering, annealing, normalizing, quenching
7.3 Non-ferrous materials such as brass, bronze, aluminium: comparative properties and machinability

8.0 Sheet Metal Work: (4 hours)
8.1 Tools
8.2 Marking and layout
8.3 Bending and rolling operations
8.4 Cutting operations

9.0 Metal Joining: (8 hours)
9.1 Safety considerations
9.2 Soldering methods and practices
9.3 Brazing methods and materials
9.4 Practice of torch brazing
9.5 Oxygen-acetylene welding methods and practices
9.6 Selection of welding rods
9.7 Arc welding methods and practices
9.8 Resistance welding
9.9 Electric arc welding

Textbooks and Reference Books:
1.0 J.Anderson and E.E. Tatro, “Shop Theory”, Mcgraw-Hill, 5th Edition, 1942.
2.0 O.D.Lascoe, C.A.Nelson andH.W.Porter, “Machine shop operations and setups”, American Technical society, 1973.
3.0 “Machine shop practice - volume I”, Industrial press, New York, 1971.
4.0 “Machine shop practice volume II”, Industrial press, New York, 1971.
5.0 K.Oswald, “Technology of Machine Tools”, McGraw Hill-Ryerson, 3rd Edition.
6.0 Oberg, Jones and Horton, “Machinery’s Handbook”, 23rd Edition, Industrial press, New York.

Workshop Practice: 3 hours per week for 12 weeks
1.0 Bench tools and hand operations: measuring, marking, layout, cutting, filling, drilling, tapping, assembly.
2.0 Bench tools and hand operations continued.
3.0 Power tools and drilling machines.
4.0 Measuring and gagging
5.0 Engine lathe: basic operations such as facing, cutoff, plain turning, knurling.
6.0 Lathe work continuation: taper turning, drilling and boring.
7.0 Basic shaper operations.
8.0 Milling machine and/or surface grinder.
9.0 Sheet metal working.
10.0 Soldering and brazing.
11.0 Gas welding.
12.0 Electric arc welding.

Engineering Drawing I

COURSE OUTLINE: To develop basic projection concepts with reference to points,
lines, planes and geometrical solids. Also to develop sketching
and drafting skills to facilitate communication.

1.0 Instrumental Drawing, Practices and Techniques (2 hours)
1.1 Equipment and Materials:
Description of drawing instruments, auxiliary equipment and drawing materials
1.2 Techniques of Instrument Drawing:
Pencil sharpening, securing paper, proper use of T-squares, triangles, scales, dividers, compasses, erasing shields, French curves, inking pens.

2.0 Freehand Technical Lettering (4 hours)
2.1 Lettering strokes, letter proportions, use of pencils and pens, uniformity and appearance of letters, freehand techniques, inclined and vertical letters and numerals, upper and lower cases, standard English lettering forms.

3.0 Dimensioning (8 hours)
3.1 Fundamentals and Techniques:
Size and location dimensioning, SI conventions
Use of scales, measurement units, reducing and enlarging drawings
3.2 General Dimensioning Practices:
Placement of dimensions, aligned and unidirectional Recommended practice,
some 50 items.

4.0 Applied Geometry (5 hours)
4.1 Plane Geometrical construction:
Bisecting and trisecting lines and angles, proportional division of lines,
construction of angles, proportional division of lines, construction of angles,
triangles, squares, polygons. Constructions using tangents and circular arcs.
Methods for drawing standard curves such as ellipses, parabolas, hyperbolas,
involutes, spirals, cycloids and helices (cylindrical and helical).
4.2 Solid Geometrical Construction:
Classification and pictorial representation of solid regular objects such as:
Prisms : square, cubical, triangular and oblique
Cylinders : right and oblique
Cones : right and oblique
Pyramids : square, triangular, oblique, truncated
Doubly-Curved and warped Surfaces: sphere, torus, oblate ellipsoid, conoid,
serpentine, paraboloid, hyperboloid.

5.0 Basic Descriptive Geometry (8 hours)
5.1 Introduction:
Application of descriptive geometry principles to the solution of problems involving positioning of objects in three-dimensional space
5.2 The Projection of points, lines and plans in space
5.3 Parallel lines
5.4 True length of lines: horizontal, inclined and oblique lines
5.5 Perpendicular lines
5.6 Bearing of a line
5.7 Point view or end view of a line
5.8 Shortest distance from a point to a line
5.9 Principal lines of a plane
5.10 Edge view of a plane
5.11 True shape of an oblique plane
5.12 Intersection of a line and a plane
5.13 Angle between a line and a plane
5.14 Angle between two intersecting lines
5.15 Angle between two non-intersecting (skew) lines
5.16 Dihedral angle between two planes
5.17 Shortest distance between two skew lines

6.0 Theory of Projection Drawing (5 hours)
6.1 Perspective Projection drawing
6.2 Orthographic projection
6.3 Axonometric projection
6.4 Oblique projection
6.5 First and third angle projection
6.6 Systems and projection

7.0 Multiview Drawings (5 hours)
7.1 Principal Views:
Methods for obtaining orthographic views
Projection of lines, angles and plane surfaces, analysis in three views
Projection of curved lines and surfaces
Object orientation and selection of views for best representation
Full and hidden lines
7.2 Orthographic Drawings:
Making an orthographic drawing
Visualizing objects from the given views
Interpretation of adjacent areas
True-length lines
Representation of holes
Conventional practices

8.0 Sectional Views (4 hours)
8.1 Full section view
8.2 Half section view
8.3 Broken section
8.4 Revolved section
8.5 Removed (detail) section
8.6 Phantom of hidden section
8.7 Auxiliary sectional views
8.8 Specifying cutting planes for sections
8.9 Conventions for hidden lines, holes, ribs, spokes

9.0 Auxiliary Views (5 hours)
9.1 Basic concept and use of auxiliary views
9.2 Drawing methods and types of auxiliary views
9.3 Symmetrical and unilateral auxiliary views
9.4 Projection of curved lines and boundaries
9.5 Line of intersection between two planes
9.6 True size of dihedral angles
9.7 True size and shape of plane surfaces

10.0 Freehand Sketching and Visualization (5 hours)
10.1 Sketching and design:
Value of sketching as part of design
10.2 Techniques of sketching:
Pencil hardness, squared paper, line densities
Techniques for horizontal, vertical and circular lines
10.3 Multiview sketches:
Choice of views, adding detail, dimensioning, title, notes
Proportioning and comparative sizing
10.4 Sketching pictorial views:
General pictorial sketching
Mechanical methods of sketching and proportioning
Isometric sketching
Oblique sketching
Perspective sketching
Conventional treatment of fillets, rounds and screw threads
Sketches of an exploded view to show assembly of components

11.0 Developments and Intersections (9 hours)
11.1 Developments:
General concepts and practical considerations
Development of a right or oblique prism, cylinder, pyramid, and cone
Development of a truncated pyramid and cone
Triangulation method for approximately developed surfaces
Transition pieces for connecting different shapes
Development of a sphere
11.2 Intersections:
Lines of intersection of geometric surfaces
Piercing point of a line and a geometric solid
Intersection lines of two planes
Intersections of prisms and pyramids
Intersection of a cylinder and an oblique plane
Intersection of a sphere and an oblique plane
Constructing a development using auxiliary views
Intersection of two cylinders
Intersection of a cylinder and a cone

DRAWING LABORATORY: 3 hours/week, 13 weeks
1.0 Freehand Technical Lettering and use of Drawing Instruments
2.0 Freehand Technical Lettering and use of Drawing Instruments
3.0 Dimensioning
4.0 Geometrical and Projection Drawing
5.0 Descriptive Geometry
6.0 Descriptive Geometry (cont)
7.0 Projection and Multiview Drawings
8.0 Projection and Multiview Drawings
9.0 Sectional views
10.0 Auxiliary views
11.0 Freehand Sketching and Visualization
12.0 Developments and Intersections
13.0 Developments and Intersections (cont)

Textbooks and Reference Books:
1.0 W.J. Luzadder, "Fundamentals of Engineering Drawing", Prentice Hall, 8th Edition, 1981.
2.0 T.E. French, C.J. Vierck and R. J. Foster, "Engineering Drawing and Graphic Technology", McGraw-Hill, 1981.
3.0 F.E. Giesecke, A. Mitchell, H. C. Spencer and J. T. Dygdone, Macmillan, 8th Edition, 1986.

Communication I (English)

Course Description:
This course is designed for the students of B.E. Level who have completed either Diploma Level in Engineering or I. Sc. It intends to develop and strengthen in them the basic communication skills in the English language with emphasis on reading, writing and speaking.

Course Objectives:
This course intends to develop:
- ability to use language laboratory facility for the practice of listening
pronunciation and oral development.
- intensive reading skills in technical and non-technical reading materials.
- skills in writing memoranda, business letters, applications and proposals.

1. Introduction to pronunciation (2 Hours)
1.1 Phonetic symbols: vowels, diphthongs and consonants.
1.2 Stress: word and connected speech.
1.3 Intonation
1.4 Practice in listening and speaking :
1.5 Effective listening and note taking.
1.6 Telling personal experience and simple incidents.
1.7 Delivering speech with notes and visual aids.

2. Intensive reading: (9 Hours)
2.1 Comprehension
2.2 Understanding: short questions answer
2.3 Contextual grammar

3. Writing: (2 Hours)
3.1 Memoranda
3.2 Business letters
3.3 Application letters
3.4 Proposals

Evaluation Scheme:
A) Internal Assessment:
Proposal writing - 6 marks
Lab - 2 marks
Attendance - 2 marks
Total: 10 marks

B) Semester Exam:
Comprehension - 14 marks
Short questions answer and contextual grammar - 10 marks
Proposal writing or
Business letter / Application - 8 marks
Memo - 4 marks
Stress / Intonation - 4 marks
Total 40 marks
Total (A + B) 50 marks

Reference Books:
1.0 Anne Eisenberg, "Effective Technical Communication", McGraw - Hill. 1982.
2.0 K.W. Hope and T.E. Pearsall, "Reporting Technical Information", 5th Edition Macmillan Publishing Company, New York, 1984.
3.0 G. M. Spankie - "English in use." 1975
4.0 John Swales - "Writing Scientific English" - 1971
5.0 JMcAllister Gmadama - "English for Electrical Engineers" -1976
6.0 Alan Mounfford - "English in Workshop Practice"
7.0 Eric H. Glending - " English in Mechanical Engineering" - 1974
8.0 Geoffrey Leech Jan Svartvik -"A Communicative Grammar of English"

Physics

Objectives
To provide the concept and knowledge of physics with the emphasis of present day applications. The background of physics corresponding to Proficiency Certificate Level is assumed.

1.0 Oscillations and Simple Harmonic motion (3 Hours)
1.1 Introduction to mean position and restoring force. Elastic restoring force. Hooks
Law. Definition of SHM. Condition of SHM. Rarity of SHM'S. Equation of SHM.
1.2 Examples of SHM: spring-mass system, Physical pendulum and torsional pendulum.
1.3 Damped Oscillations. Equation of damped oscillator. Forced oscillation and resonance.

2.0 Wave in Elastic Media (6 Hours)
2.1 Introduction to the wave process. Types of waves (only introduction). Speed of transverse waves. Dependence of wave velocity from the properties of medium. Equation of wave process; Particle velocity and particle acceleration.
2.2 Energy power and intensity in wave motion. Standing waves and resonance.

3.0 Acoustics (7 Hours)
3.1 Sound waves. Propagation of sound wave in solids, liquids and gases (review). Pressure variation due to waves.
3.2 Energy considerations. Intensity, Intensity level and loudness. Decibel and phon. Introduction to the reflection, refraction, attenuation and diffraction of sound.
3.3 Auditorial acoustics. Reverberation of sound. Sabine's Law. Conditions for good auditorium and concert halls.
3.4 Doppler effect.
3.5 Ultrasound: Introduction and properties. Production of ultrasound by magnetostriction and piezoelectric methods. Uses of ultrasound in distance measurement, signaling. Non-destructive test of structures and materials.

4.0 Electrostatics (8 Hours)
4.1 Electric charge. Coulomb's law of electrostatic field. Lines of force. Calculation of electric field due to dipole, quadrupole, charged ring and linear charge.
4.2 Electric flux. Gauss' Law and its application to charges dielectric sphere.
4.3 Electric potential. Potential, field strength and potential gradient. Potential due to a point charge.
4.4 Potential due to dipole and quadrupole. Electrostatic potential energy.
4.5 Capacitors: Parallel plate capacitor, cylindrical capacitor, spherical capacitor.
4.6 Effect of dielectrics. Determination of relative dielectric Permitivity. Conductors and dielectrics in electric field. E and D fields. Energy stored in electric field. Energy density.
4.7 High intensity electrostatic fields. Uses of static electric fields in Xeroxing and precipitation. Hazard of strong electrostatic fields: lightning.

5.0 Direct current (3 Hours)
5.1 Current and current density. Current flow in solid, liquid and gases. Ohm's law. Resistance's in series and in parallel.
5.2 Kirchhoff's Laws.
5.3 Atomic view of resistivity. Current flow in semiconductors and metals. Temperature dependence of resistivity.
5.4 Energy loss in circuit. Joule's Law of heating effect. Long distance transmission lines.
5.5 Charging and discharging of a capacitor through a resistor. Time constant.

6.0 Magnetism and Magnetic fields. (7 Hours)
6.1 Source of Magnetic fields: Current and permanent magnets. Terrestrial magnetism. Lines of force. Flux of magnetic field and permeability.
6.2 Biot and Savart's law and its application to long straight wire and circular current loop. Amperes theorem and its application to long straight conductor, solenoid and toroid carrying current.
6.3 Magnetic scalar potential and potential gradient.
6.4 Force on moving charge on magnetic field. Hall effort. Force on conductor in magnetic field. Force per unit length between parallel conductors carrying current.
6.5 Faraday's law of electromagnetic induction. Flux linkage. Lenz's law. Selfinduction. Calculation of the coefficient of self-induction for solenoid and toroid.
6.6 LR circuit. Energy stored in magnetic field. Energy density of magnetic field.
6.7 H, B and fields.

7.0 Electromagnetic Oscillations (7 Hours)
7.1 LC oscillations. Analogy to SHM.
7.2 Electromagnetic oscillations of LCR circuit. Forced oscillation of LCR circuit and resonance.

8.0 Electromagnetic waves (4 Hours)
8.1 Equation of continuity as the law of conservation of electric charge. Maxwell equations in integral and differential forms.
8.2 Displacement current and its significance.
8.3 Application of Maxwell equations: wave equations in free space and nonconducting medium.
8.4 Speed of electromagnetic waves. Energy of electromagnetic wave. Poynting vector.

9.0 Optics (15 Hours)
9.1 Introduction to light: Light as EM wave. Geometrical and wave optics. (Concepts only). Review of refraction through lenses. Combination of two lenses separated by distance. Cardinal points. Achromatic combination of two lenses separated by distance
9.2 Monochromatic aberration of lenses. Spherical aberration, astigmatism, coma, curvature of field and distortion. Causes and their minimization.
9.3 Fibre Optics: Introduction to optical fibres as medium for guiding a wave. The meaning of self focussing in optical fibres. Types of optical fibres according to the variation of refractive index within the optical fibres: single mode and multi mode. Uses of laser light in communication.
9.4 Lasers: principle of the generation of laser light. Basic differences of laser light from ordinary light: beam size, non-divergence, and high degree of monochromaticity and coherence. Uses of laser: industrial, medical and communication.
9.5 Interference. Introduction and mathematical theory. Coherent sources. Causes of non-coherence. Examples of the division of wavefront and amplitude. Interference in thin films and wedges. Fringes of equal inclination and fringes of equal thickness. Non-reflecting films. Newton's rings. Uses of interference in analysing the variation of thickness.
9.6 Diffraction: Introduction. Difference between Fresnel and Fraunhoffer diffraction. Difference between interference and diffraction pattern. Explanation of the variation of intensity due to single slit. Diffraction grating. Resolving power to diffraction gratings.
9.7 Polarisation: Visual explanation of polarization wave. Introduction to polarised and non-polarised light. Methods for obtaining polarised light. Malus' Law. Linearly, elliptically and circularly polarized light. Double refraction. Ordinary and extraordinary rays. Positive and negative crystals. Quarter and half-wave plates. Uses of polarised light in stress analysis. Optical activity. Specific rotation. Uses of optical activity in cahharimetry and detection of adulteration.

Text Books
1 Haliday, Resnick and Walker, "Fundamentals of Physics", Fourth Edition, John Wiley and Sons 1988, 1993 and later editions.
2 A.S. Vasudeva, "Modern Engineering Physics", S-Chand & Co 1998, Delhi.
3 Robert Resnick and David Halliday, "Physics: Part I and II", 20th Edition, Wiley Eastern Limited, 1985.

Reference Books:
1 Subramanyam and Brij Lal, "Optics" S-Chand & Co 1994, 1995 Delhi.
2 A.S. Vasudeva, "Concept of Modern Engineering Physics", S-Chand & Co 1998, Delhi.

Laboratory:
1.0 Vibrating string.
2.0 Resonance tube
3.0 Geometrical optics.
4.0 Interference, difference and polarization.
5.0 Electrostatics.
6.0 Field mapping.

MATHEMATICS I

First Year, First Part (I/I)

Lecture: 3
Tutorial: 2

COURSE OBJECTIVES:
It is assumed that incoming students have a good grounding in algebra, some knowledge of trigonometry and analytic geometry and previous to calculus. By the end of the course, students will have seen the development of all of the elementary functions, ranging from polynomials to the inverse hyperbolic functions. In parallel, the calculus will be developed, making use of the
increasing richness of the available functions. The student's skills in differentiation and integration will thus be progressively improved. Simple applications of the calculus will be explored from time to time. The course will conclude with brief discussion of conic sections and coordinate transformations.

1. Review. (5 hours)
1.1 Limit, Continuity.
1.2 Derivability of functions of a single variable. Derivative rules and formulas.
1.3 Integration rules and standard integrals.

2. Derivative (9 hours)
2.1 Higher order derivatives.
2.2 Maxima and Minima.
2.3 Mean value theorems.
2.4 Taylor and Maclaurin series.
2.5 Tangent and Normal.
2.6 Curvature.
2.7 Asymptotes.
2.8 Curve tracing.

3 Antiderivatives. (12 hours)
3.1 Definite integrals.
3.2 Fundamental theorem of integral calculus.
3.3 Improper integrals.
3.4 Reduction formulae for integrals, Beta and Gamma functions,

4 Applications of Integral ( 8 hours)
4.1 Areas
4.2. Lengths
4.3 Volumes.
4.4 Surfaces

5 Ordinary differential equations ( 5 hours)
5.1 Differential equations of first and second orders.
5.2 Linear equations with constant coefficients.

6. Analytic Geometry of two dimensions (6 hours)
6.1 Translation and rotation of axes.
6.2 Parabola.
6.3 Ellipse.
6.4 Hyperbola.
6.5 Central conics.

Textbook
1. E.W. Swokowski, "Calculus With Analytic Geometry", Second Alternate Edition,
PWS-Kent Publishing Co., Boston.

Course Coding

The Course is coded in following format
EG ABC XY


The meaning of the above format
EG: Institute (Engineering)

ABC
A: Year (4-first Year, 5 second year and so on)
BC: Course Number
01
- 49 Course offered in Odd Semester
51 - 99 Course offered in Even Semester

XY: Offering Department
SH - Science and Humanities
CE - Civil Engineering
EE - Electrical Engineering
EX - Electronics Engineering
ME - Mechanical Engineering
AR - Architecture Engineering
CT - Computer Engineering