Showing posts with label Electronics Engineering. Show all posts
Showing posts with label Electronics Engineering. Show all posts

Thursday, September 18, 2008

Project Engineering

Course Objectives
To provide the student with the fundamental concepts of initiating, planning, scheduling and controlling projects.

1.0 Introduction: (3 hours)
1.1 Project definition
1.2 Setting project objectives and goals
1.3 Project phases, project life cycle

2.0 Project Planning and Scheduling: (18 hours)
2.1 Planning function
2.2 Network models - CPM/PERT
2.3 Project scheduling with limited resources
2.4 Wiest's algorithms
2.5 Manpower leveling
2.6 Multiproject scheduling
2.7 Materials scheduling
2.8 Mathematical programming for minimum cost or maximum project return (simplex technique for linear programming)

3.0 Project Monitoring and Control: (10 hours)
3.1 Systems of control
3.2 Project control cycle
3.3 Feedback control systems
3.4 Cost control
3.5 Work breakdown structure
3.6 Introduction to project management information systems

4.0 Capital Planning and Budgeting: (10 hours)
4.1 Capital planning procedures
4.2 Preparation of operating budgets
4.3 Fixed and flexible budgets
4.4 Introduction to budgetary control

5.0 Impact Analysis: (4 hours)
5.1 Social impact analysis
5.2 Environmental impact analysis
5.3 Economic impact analysis

Textbook:
1.0 Arnold M. Ruskin and W. Eugene Estes, "Project Management", Marcel Dekker Publishers, 1982.
2.0 Joseph J. Moder and Cecil R. Phillips, "Project Management with CPM and PERT", Van Nostrand Reinhold Publishers, Latest Edition.
References:
1.0 L. S. Srinrat, "Pert and Application", East-West Press.
2.0 A. Bhattacharya and S. K. Sorkhel, "Management by Network Analysis", The Institution of Engineers (India).
3.0 Prasanna Chandra, "Projects: Preparation, Appraisal, Implementation", Tata McGraw-Hill Publishing Company Ltd., New Delhi.

Communication Systems

Course Objectives
To introduce the student to analog and digital communication systems.

1.0 Analog and Digital Communication Systems: (2 hours)
1.1 Analog and digital communication sources, transmitters, transmission channels and receivers
1.2 Fundamental limitations due to noise, distortion and interference and the relationships between noise, bandwidth and information
1.3 Types and reasons for modulation

2.0 Representation of Communication Signals and Systems: (2 hours)
2.1 Review of signal transfer in linear systems, the ideal lowpass filter and distortionless transmission, the importance of channel bandwidth
2.2 The Hilbert transform and its properties
2.3 Bandpass systems and band-limited signals with examples
2.4 Complex envelope representation of band-limited signals, time domain expressions, rectangular representation (in-phase and quadrature components), polar representation (envelope and phase)

3.0 Continuous Wave Linear Modulators: (6 hours)
3.1 Amplitude modulation (AM), time domain expressions and modulation index, frequency domain (spectral). representations, transmission bandwidth for AM
3.2 AM modulation for a single tone message, phasor diagram of an AM signal, illustration of the carrier and sideband components
3.3 Transmission requirements for AM, normalized power and its use in communication, carrier power and sideband power
3.4 Double sideband suppressed carrier (DSB) modulation, time and frequency domain expressions
3.5 Transmission requirements for DBS, bandwidth and transmission power for DSB
3.6 Methods of generating AM and DSB, square modulators, balanced modulators, ring modulators
3.7 Single sideband modulation (SSB), generation of SSB using a sideband filter, indirect generation of SSB
3.8 Representation of SSB signals
3.9 Transmission requirements for SSB, transmit bandwidth and power, sideband filter examples
3.10 Vestigial sideband modulation (VSB)

4.0 Demodulators for Linear Modulation: (4 hours)
4.1 Demodulation of AM signals, square law and envelop detectors
4.2 The superheterodyne receiver for standard AM radio
4.3 Synchronous demodulation of AM, DSB and SSB using synchronous detection
4.4 Effects of frequency and phase errors in the local oscillator in DSB and SSB
4.5 Demodulation of SSB using carrier reinsertion and the use of SSB in telephony
4.6 Carrier recovery circuits
4.7 Introduction to the phase-locked loop (PLL)

5.0 Frequency Modulation (FM) and phase Modulation (PM): (4 hours)
5.1 Instantaneous frequency and instantaneous phase, time domain representations for FM and PM, phasor diagram for FM and PM
5.2 FM and PM signals for a single tone message, the modulation index and phasor diagrams
5.3 Spectral representation of FM and PM for a single tone message, Bessel’s functions and the Fourier series
5.4 Transmission bandwidth for FM, Carson’s rule, narrow-band and wide-band FM and PM signals
5.5 Generation of FM using Armstrong’s method, commercial FM requirements
5.6 Demodulation of FM and PM signals, the limiter discriminator
5.7 Commercial FM radio and stereo FM radio
5.8 Demodulation of FM using a phase-locked loop

6.0 Frequency Division Multiplexing (FDM) Systems: (1 hours)
6.1 FDM in telephony, telephone hierarchy and examples of group and super-group generation
6.2 Satellite systems and applications, frequency division multiple access (FDMA) systems
6.3 Filter and oscillator requirements in FDM

7.0 Spectral Analysis: (3 hours)
7.1 Review of Fourier transform theory, energy and power, parseval’s theorem
7.2 Power spectral density functions (pfsd), analog spectrum analyzers
7.3 The auto-correlation function, relationship between the pfsd and the auto-correlation function, pfsd’s of harmonic signals, psfd’s of uncorrelated (white) signals
7.4 Estimating psfd’s, the periodogram, psdf’s of harmonic signals
7.5 Effect of windowing on psdf estimates

8.0 Digital Communication Systems: (2 hours)
8.1 Digital communication sources, transmitters, transmission channels, and receivers
8.2 Distortion, noise, and interference
8.3 Nyquist sampling theory, sampling of analog signals, spectrum of a sampled signal
8.4 Sampling theorem for band-limited signals, effects of aliasing, reconstruction of sampled signals

9.0 Pulse Modulation Systems: (6 hours)
9.1 Pulse amplitude modulation (PAM), bandwidth requirements and reconstruction
methods, time division multiplexing
9.2 Pulse duration modulation (PDM), generation of PDM signals and reconstruction methods
9.3 Analog to digital conversion, quantization and encoding techniques, application to pulse code modulation (PCM)
9.4 Quantization noise in PCM, companding in PCM systems
9.5 Time division multiplexing (TDM), examples of PAM and PCM systems
9.6 The TI PCM system in telephony
9.7 The delta modulator and its operation
9.8 Quantization noise and slope overload in delta modulators, comparison of delta modulation and PCM
9.9 Introduction to linear prediction theory with applications in delta modulation

10.0 Digital Data Communication Systems: (8 hours)
10.1 Introduction to information theory, definition of information, examples of simple sources
10.2 Information rate and Shannon's channel capacity theorem
10.3 Baseband digital communication systems, multilevel coding using PAM
10.4 Pulse shaping and bandwidth considerations, intersymbol interference (ISI)
10.5 Nyquist conditional for zero ISI, band-limited Nyquist pulses, the eye diagram
10.6 Correlative coding techniques, reducing transmission bandwidth with duobinary encoding
10.7 Spectral shaping using bipolar and modified duobinary encoding techniques
10.8 Bandpass (modulated) digital data systems, digital modulation, PSK, DPSK and FSK
10.9 M-array data communication systems, quadrature amplitude modulation (QAM) systems, four phase PSK
10.10 Applications of modems for transmission over telephone lines

11.0 Representation of Random Signals and Noise in Communication Systems: (8 hours)
11.1 Signal power and spectral representations, the auto-correlation and power spectral density (pfsd) functions
11.2 White noise, thermal noise, the psdf of white signals
11.3 Input and output relationships for random signals and noise passed through a linear time invariant system, band-limited white noise, RC filtering of white noise
11.4 The noise bandwidth of a linear time invariant system and its use in communications
11.5 Optimum detection of a pulse in additive white noise, the matched filter
11.6 Matched filter detection in baseband data communication systems
11.7 Comparison of the matched filter for rectangular pulses with first and second order suboptimum Butterworth filters
11.8 Performance limitation of baseband data communications due to noise,
probability of error expressions for multilevel data signals
11.9 Relationship between signal power, noise and channel bandwidth, comparison of systems using Shannon capacity
11.10 Narrowband noise representation, generation of narrowband noise and psdf, time domain expressions for narrowband noise

12.0 Noise Performance of Analog and Digital Communication Systems: (8 hours)
12.1 Signal-to-noise ratio in linear modulation, synchronous detection of DSB
12.2 Signal-to-noise ratios for AM and SSB, comparison of DSB, SSB and AM
12.3 Effect of noise in envelope and square law detection of AM, threshold effects in nonlinear detectors
12.4 Signal-to-noise ratio for FM, SNR improvements using preemphasis and deemphasis networks
12.5 FM threshold effects, noise clicks in FM systems
12.6 Comparison of linear and exponential modulation systems for additive white band-limited noise channels
12.7 Effects of noise in modulated digital communication systems, optimum binary systems
12.8 Probability of error expressions for binary communications
12.9 Probability of error in QAM systems, comparison of digital modulation systems

13.0 Introduction to Coding Theory: (5 hours)
13.1 Block coding for error detection and correction, parity check bits and block coding
13.2 Examples of single cyclic error correcting codes
13.3 Introduction to convolution codes

Laboratory: Following Ten experiments are recommended:
1.0 Lowpass and bandpass filters with applications in communications. The student will be required to design and test a 4th order filter constructed using two 2nd order sections. The filter chips used will be the Burr-Brown UAFAI and the implementation could be Butterworth, Chebyshev or Bessel.

2.0 and 3.0 Linear modulation. This experiment will familiarize the student with linear modulation methods including double sideband modulation (DBS) and amplitude modulation (AM). will be compared to envelope detection.

4.0 Power spectral density (psdf) measurement of signals. A digital spectrum analyzer will be used to measure the psdf of signals. In particular, the power spectral density of frequency modulated signals will be analyzed and compared with theory.

5.0 Demodulation of frequency modulated signals using a phase locked loop (PLL). A second order PLL to demodulate an FM signal will be designed and tested in the laboratory. The PLL chip to be used is the CD4046B.

6.0 The delta modulator. In this experiment the effects of sampling rate, number of bits in the up-down counter are quantized and measured. The resulting family of SWR curves are compared with expected theoretical results.

7.0 Baseband data communications. A baseband communication system using NRZ signals and 2nd order transmit and receive filters is investigated. The measurements include the eye diagram and probability of error.

8.0 Correlative encoding. A correlative encoder is designed by the student and implemented in hardware. Commonly used encoders include duobinary, bipolar and modified duobinary. A corresponding digital simulation can also be used to illustrate the difference between analog and digital filtering.

9.0 Demodulation of frequency shift keying (FSK) using a phase locked loop (PLL). This is the digital counter-part of Laboratory #5 in COMMUNICATION SYSTEMS I. The PLL is designed to provide a good EYE while still ensuring that the loop stays in lock.

Note: A computer package can be used to replace most of the above hardware experiments. One such package is marketed by: Icucom Corporation, 48 Ford Avenue, Troy, New York 12080, (518) 247-7711 and is called "The Workstation Communications Simulator".

References:
1.0 S. Haykin, "An Introduction to Analog and Digital Communication", Wiley, New York, 1989.
2.0 L. W. Couch II, "Digital and Analog Communication Systems", 2nd Edition, Macmillan Publishing Company, New York, 1987.

Monday, September 15, 2008

Probability and Statistics

Course Objectives
To provide the student with a practical knowledge of the principles and concepts of probability and statistics and their application to simple engineering problems.

1. Introduction and Descriptive Statistics: (4 hours)
1.1. An overview of probability and statistics
1.2. Pictorial and tabular methods in descriptive statistics
1.3. Measures of location: mean, median, quartiles, percentiles, etc.
1.4. Measures of variability

2. Probability: (4 hours)
2.1. Sample spaces and events
2.2. Axioms, interpretations and properties of probability
2.3. Counting techniques
2.4. Conditional probability
2.5. Independence

3. Discrete Random Variables and Probability Distributions: (6 hours)
3.1. Random variables
3.2. Probability distributions for random variables
3.3. Expected values of discrete random variables
3.4. The binomial probability distribution
3.5. The hypergeometric and negative binomial distributions
3.6. The Poisson probability distribution

4. Continuous Random Variables and Probability Distributions: (6 hours)
4.1. Continuous random variables and probability density functions
4.2. Cumulative distribution functions and expected values
4.3. The Normal Distribution
4.4. The Gamma Distribution
4.5. Chi-Squared Distribution

5. Joint Probability Distributions and Random Samples: (4 hours)
5.1. Jointly distributed random variables
5.2. Expected values, covariance and correlation
5.3. Sums and averages of random variables
5.4. The central limit theorem

6. Point Estimation: (2 hours)
6.1. Some general concepts of point estimation
6.2. Methods of point estimation

7. Interval Estimation: (3 hours)
7.1. Basic properties of Confidence Interval
7.2. Large-sample Confidence interval for population Mean and Proportion
7.3. A Confidence intervals for the mean of Normal Population
7.4. Confidence interval for the Variance and Standard Deviation of a Normal Population

8. Hypothesis Testing Procedures Based on a Single Sample: (5 hours)
8.1. Hypothesis and Test Procedure
8.2. Tests about the mean of a Normal Population
8.3. Large-sample Test for population mean
8.4. Large-sample Test for a population proportion
8.5. The t-test
8.6. Some comments on selecting a test procedure

9. Hypothesis Testing Based on Two Samples: (4 hours)
9.1. z-tests for differences between two population means
9.2. The sample t-test
9.3. Analysis of paired Data
9.4. Testing for differences between population proportions

10. Simple Linear Regression and Correlation: (4 hours)
10.1. The simple linear probabilistic model and principle of least square
10.2. Correlation, Correlation coefficient and coefficient of determination
10.3. Linear and non-linear Regression
10.4. Line of Regression and coefficient of Regression

11. The Analysis of categorical Data: (3 hours)
11.1. Goodness of Fit tests when category Probabilities are completely specified
11.1.1. Goodness of fit for composite Hypothesis
11.1.2. Two way contingency Tables

Textbook:
1.0 Jay L. Devore, “Probability and Statistics for Engineering and the Sciences”, Brooks/Cole publishing Company, Monterey, California, 1982.

Reference Book:
11 Murray R. Spiegel, "Theory and Problems of Probability and Statistics", McGraw Hill, Singapore
12 D. C. Sancheti and V. K. Kapoor, "Statistics", Sultan Chand and Sons, Educational Publishers, India
13 S. C. Gupta, "Fundamental of Statistics", Himalaya Publishing House, India
14 Jeetendra P. Aryal and Arun Gautam, "Quantitative Technique Vol. II", Vidhyarthy Pustak Bhandar, Nepal
15 S. C. Gupta and V. K. Kapoor, "Fundamentals of Mathematical Statistics", Sultan Chand & Son, India

Engineering Economics

Course Objectives
To provide a knowledge of the basic tools and methodology of economic studies for evaluating engineering projects in private industry, in the public sector and in the utilities area.

1.0 Introduction (3 hours)
1.1 Essential business and accounting terminology
1.2 Definition of cash flow
1.3 Economic systems

2.0 Cost Classification and Analysis (5 hours)
2.1 The elements of cost
2.2 Classification of cost: overhead cost, prime cost
2.3 Cost variance analysis
2.4 Job and process costing

3.0 Interest and the Time Value of Money (6 hours)
3.1 Simple interest, compound interest, interest tables, interest charts
3.2 Present worth
3.3 Nominal and effective interest rates
3.4 Continuous compounding and continuous compounding formula
3.5 Interest calculations for uniform gradient

4.0 Basic Methodologies of Engineering Economic Studies (7 hours)
4.1 Present worth and annual worth methods
4.2 Future worth method
4.3 Internal rate of return method
4.4 Drawbacks of the internal rate of return method
4.5 External rate of return method
4.6 Minimum attractive rate of return method
4.7 The payback (payout) period method

5.0 Cost/Benefit Analysis (4 hours)
5.1 Conventional cost/benefit ratio
5.2 Modified cost/benefit ratio
5.3 Breakeven analysis

6.0 Investment Decisions: (8 hours)
6.1 Comparison of alternatives having same useful life
6.2 Comparison of alternatives having different useful life
6.3 Comparison of alternatives including or excluding the time value of money
6.4 Comparison of alternatives using the capitalized worth method
6.5 Definition of mutually exclusive investment alternatives in terms of
combinations of projects
6.6 Comparison of mutually exclusive alternatives

7.0 Risk Analysis: (4 hours)
7.1 Projects operating under conditions of certainty
7.2 Projects operating under conditions of uncertainty
7.3 Decision tree
7.4 Sensitivity analysis

8.0 Taxation System in Nepal: (3 hours)
8.1 Taxation law in Nepal
8.2 Depreciation rates for buildings, equipment, furniture, etc.
8.3 Recaptured depreciation
8.4 Taxes on normal gains
8.5 Taxes on capital gains

9.0 Demand Analysis and Sales Forecasting (5 hours)
9.1 Demand analysis
9.2 Correlation of price and consumption rate
9.3 Multiple correlation of price and consumption rate
9.4 Market research
9.5 Sales forecasting
9.6 Criteria for desirable sales forecasting procedures
9.7 Factors affecting accuracy of forecasting

Tutorials: 3 Assignments, 2 Quizzes, 3 Case Studies

Note:
The case studies will concentrate on economic analysis and selection of public projects, economic analysis and selection of private projects, risk analysis and demand analysis.

Textbook:
1.0 E. P. DeGramo, W. G. Sullivan and J. A. Bontadelli, 8th Edition, Macmillan publishing Company, ,1988.

References:
1.0 N. N. Borish and S. Kaplan, "Economic Analysis: For Engineering and Managerial Decision Making", McGraw-Hill.

Control Systems

Course Objectives
To provide information on feedback control Principles and to apply these concepts to typical physical processes. To introduce solution of typical problems.

1.0 Component Modeling, Linearization: (7 hours)
1.1 Differential equation and transfer function notations
1.2 State-space formulation of differential equations, matrix notation
1.3 Mechanical components: mass, spring, damper
1.4 Electrical components: inductance, capacitance, resistance, sources, motors, tachometers, transducers, operational amplifier circuits
1.5 Fluid and fluidic components
1.6 Thermal system components
1.7 Mixed systems
1.8 Linearized approximations of non-linear characteristics

2.0 System Transfer Functions and Responses: (10 hours)
2.1 Combinations of components to physical systems
2.2 Block diagram algebra and system reduction
2.3 Mason’s loop rules
2.4 Laplace transform analysis of systems with standard input functions - steps, ramps, impulses, sinusoids
2.5 Initial and final steady-state equilibria of systems
2.6 Principles and effects of feedback on steady-state gain, bandwidth, error magnitude, dynamic responses

3.0 Stability: (4 hours)
3.1 Heuristic interpretation of the conditions for stability of a feedback system
3.2 Characteristic equation, complex plane interpretation of stability, root locations and stability
3.3 Routh-Hurwitz criterion, eigenvalue criterion
3.4 Setting loop gain using the R-H criterion
3.5 Relative stability from complex plane axis shifting

4.0 Root Locus Method: (6 hours)
4.1 Relationship between root loci and time responses of systems
4.2 Rules for manual calculation and construction of root loci diagrams
4.3 Computer programs for root loci plotting, polynomial root finding and repeated eigenvalue methods
4.5 Derivative feedback compensation design with root locus
4.6 Setting controller parameters using root locus
4.7 Parameter change sensitivity analysis by root locus

5.0 Frequency Response Methods: (4 hours)
5.1 Frequency domain characterization of systems
5.2 Relationship between real and complex frequency response
5.3 Bode amplitude and phase plots
5.4 Effects of gain time constants on Bode diagrams
5.5 Stability from the Bode diagram
5.6 Correlation between Bode diagram plots and real time response: gain and
phase margins, damping ratio
5.7 Polar diagram representation, Nyquist plots
5.8 Correlation between Nyquist diagrams and real time response of systems: stability, relative stability, gain and phase margin, damping ratio

6.0 Simulation Using Microcomputer and Appropriate Software: (4 hours)
6.1 Role of simulation studies
6.2 Linear and non-linear simulations
6.3 TUTSIM as a simulation tool

7.0 Performance Specifications for Control Systems: (2 hours)
7.1 Time domain specifications: steady-state errors, response rates, error criteria,
hard and soft limits on responses, damping ratio, log decrement
7.2 Frequency domain specifications: band width, response amplitude ratio

8.0 Compensation and Design: (8 hours)
8.1 Application of root locus, frequency response and simulation in design
8.2 Meeting steady-state error criteria
8.3 Feedback compensation
8.4 Lead, lag, and lead-lag compensation
8.5 PID controllers

Laboratory:
1.0 Identification of Control System Components
- establish transfer functions and block diagram of electromechanical servo
system for position and velocity control
2.0 Open and Closed Loop Performance of Servo Position Control System
- note effects of loop gain on response
- record step responses and compare with those predicated by theory
3.0 Open and Closed Loop Performance of Servo Velocity Control System
- note effects of loop gain on response
- record step responses and compare with those predicated by theory
4.0 Simulation Study of Feedback System Using TUTSIM
- set up simulation model of servo system using TUTSIM on a microcomputer
and repeat response tests
5.0 Design of a PID Controller
- design of a PID controller for position servo
- check design with TUTSIM
- check design on operating system
6.0 Non-Electrical Control System
- study of a hydraulic or pneumatic servo system

Textbook:
1.0 K. Ogata, “Modern Control Engineering”, 2nd Edition, Prentice Hall, Englewood Cliffs, New Jersey, 1990.

Communication II (English)

Course Description:
This course is designed for the B. E. Level I year II part students of Civil, Mechanical and III
year I part students of Electrical, Electronics and Computer. It intends to develop and
strengthen in students the communication skills in the English language with emphasis on
writing, reading and speaking.

Course Objectives:
This course intends to develop skills in:
- understanding and using varieties of English.
- public speaking and mass communication.
- preparing and conducting meeting.
- faster / extensive reading.
- writing description, technical talk, seminar paper.
- writing technical reports.

1. Varieties of English: (1 hour)
1.1 British / American.
1.2 Formal / Informal.
1.3 Spoken / Written.
1.4 Polite / Familiar and Impersonal.

2. Mass communication:
2.1 Presentation of talk
2.2 Presentation of seminar paper.
2.3 Conduction of meeting.

3. Extensive reading (4 hours)
3.1 Scanning
3.2 Skimming

4. Writing (10 hours)
4.1 Writing description: Landscape, technical processes, mechanical / electrical
objects, maps, graphs, charts.
4.2 Preparing note and writing talk.
4.3 Writing seminar paper
4.4 Writing agenda, minute and notice.
4.5 Writing technical reports.

Evaluation Scheme:
A) Internal Assessment:
Report writing - 4 marks
Technical talk / Seminar paper or meeting - 4 marks
Attendance - 2 marks
Total: 10 marks

B) Semester Exam:
Varieties - 4 marks
reading - 8 marks
Description writing - 4 marks
Seminar paper / talk - 8 marks
Meeting - 6 marks
Report writing - 10 marks

Total: 40 marks
Total (A + B) 50 marks

Reference Books:
1.0 Anne Eisenberg, "Effective Technical Communication", McGraw - Hill. 1982.
2.0 K. W. Hope and T.E. Pearsall, "Reporting Technical Information", 5th Edition Macmillan Publishing Company, New York, 1984.

Numerical Methods

Course Objectives
To present the theory of numerical computational procedures for solving engineering problems. Solution of ordinary and partial differential equations will be included.

1.0 Solution of Nonlinear Equations: (10 hours)
1.1 Review of calculus, continuity, differentiability, intermediate value theorem, Taylor’s theorem
1.2 Absolute, relative, and round off errors, error bounds for computational errors
1.3 Bisection method, its error bounds and convergence
1.4 Newton’s method, secant method and their convergence
1.5 Fixed point iteration, its convergence properties,
1.6 Zeros of polynomials by Horner’s method

2.0 Interpolation and Approximation: (10 hours)
2.1 Taylor’s polynomial approximation, Lagrange’s interpolation
2.2 Newton’s interpolation and divided differences
2.3 Iterative interpolation
2.4 Cubic spline interpolation
2.5 Least squares method of fitting continuous and discrete data or functions

3.0 Numerical Differentiation and Integration: (5 hours)
3.1 Numerical differentiation formulas
3.2 Newton-Cote’s numerical integration formulas, composite numerical integration
3.3 Romberg integration algorithm
3.4 Gaussian integration formulas

4.0 Linear Algebraic Equations: (10 hours)
4.1 Review of the properties of matrices
4.2 Matrix form of Gaussian elimination, pivoting strategies, ill-conditioning
4.3 Cholesky’s and related algorithms for matrix factorization
4.3 Eigen values and eigen vectors and the power method

5.0 Solution of ordinary Differential Equations: (7 hours)
5.1 Euler’s method for solving ordinary differential equations of 1st order and other related methods
5.2 Runge-Kutta methods
5.3 Extension to higher order equations
5.4 Initial value problems
5.5 Boundary value problems
6.0 Solution of partial Differential Equations: (3 hours)
6.1 Introduction to the solution of partial differential equations
6.2 Engineering examples

Reference Books:
1.0 W. Cheney and D. Kincaid, “Numerical Mathematics and computing”, Edition, Brooks/Cole publishing Co.,1985.
2.0 C.F. Gerald and P. O. Wheatley, “Applied Numerical Analysis”, 4th Edition, Addison-Wesley Publishing Company, New York.
3.0 S. Yakowitz and F. Szidarovszky, “An Introduction to Numerical Computations”, 2nd Edition, Macmillan publishing Co., New York.

Reference Book for Programs in C:
1.0 W.H. press, B. P. Flannery et. al., “Numerical Recipes in C”, 1st Edition, Cambridge Press,1988.

Sunday, September 14, 2008

Electrical Machines I

Course Objectives
To introduce and apply electric magnetic circuit concepts to electromechanical energy conversion to explain and predict the performance of basic devices such as transformer, electromagnets and rotating electric machines.

1.0 Magnetic Circuit Concepts: (5 hours)
1.1 Ohm’s law for magnetic circuits
1.2 Magnetic potential sources, electric current, permanent magnetic materials
1.3 Ferromagnetic materials, magnetic saturation, non-linearity, Hysterisis
1.4 Series and parallel magnetic circuits
1.5 Effect of air gaps
1.6 DC and AC excitation, Hysterisis and eddy currents, energy loss, laminations, sintered core
1.7 Self and mutual inductances
1.8 Force due to magnetic effects, electromagnets.

2.0 Transformer: (8 hours)
2.1 Magnetic circuits of transformer, transformer steels
2.2 Ideal transformers
2.3 Mutual inductance and coupled model of transformers
2.4 Air core Vs iron core transformers
2.5 Two winding transformers
2.6 Equivalent circuit of power transformers
2.7 Evaluation of Equivalent circuit parameters from open circuit and short circuit tests
2.8 Excitation consideration: core losses, current harmonics
2.9 Equivalent circuit calculation: voltage regulation and efficiency
2.10 Polarity of windings
2.11 Series and parallel connection of windings
2.12 Audio transformers Vs power transformers
2.13 Auto transformers
2.14 Instrumentation transformers – PTs, CTs
2.15 Three phase transformer connection
2.16 V-V and open delta connection
2.17 T-T connections
2.18 Scott 3 phase to 2 phase connections.

3.0 Principles of Electromechanical Energy Conversion: (2 hours)
3.1 Energy storage and retrieval from magnetic fields
3.2 Lenz’s law, Faraday’s laws, Fleming’s rule
3.3 Force and torque due to magnetic fields, principle of virtual work, the coenergy function
3.4 Interaction between electric, magnetic and mechanical systems

4.0 General Aspects of Modeling and Steady State Performance of DC machines: (4 hours)
4.1 DC machine constructional features
4.2 Magnetic circuit, air gap flux patterns
4.3 Mechanical rectification by commutator action
4.4 Torque Production and voltage generation
4.5 Armature windings, lap and wave windings
4.6 Field excitation: shunt, series and compound fields
4.7 Armature reaction
4.8 Commutation, interpoles.
4.9 Reversible energy flow between electrical and mechanical systems with a dc machine

5.0 DC Motors: (4 hours)
5.1 Torque/speed characteristics of shunt field, series field and compound field motors.
5.2 Effects of armature reaction on motor operation
5.3 Commutation problems, pole face compensating windings
5.4 Speed regulation and control in dc motors
5.5 Effect of field excitation and armature applied voltage on steady state performance of dc motors
5.6 Reversal of rotation of dc motors
5.7 Motor starting problems, limiting armature current inrush.

6.0 DC Generators: (4 hours)
6.1 Voltage/speed/load characteristics of dc generators
6.2 Shunt, series and compound field machines
6.3 Separate and self-excited machines, voltage build-up in self excited generators
6.4 Voltage regulation of generators

7.0 Control of DC Machines in the steadies-state: (3 hours)
7.1 Automatic voltage regulation of dc generators
7.2 Manual and automatic starting and speed control of motors, armature voltage and shunt field control.

8.0 Induction machines: (8 hours)
8.1 Construction and type
8.2 Rotating magnetic field and action of induction motor
8.3 Torque-slip characteristic
8.4 Losses and efficiency
8.5 Induction motor starter
8.6 Induction generator

9.0 Synchronous machines: (8 hours)
9.1 Basic structure of synchronous machines, salient pole and cylindrical rotor structure
9.2 Synchronous generators
9.2.1 Operating principle and emf equation
9.2.2 Speed and frequency relationship.
9.2.3 Synchronous generator on load, armature reaction, voltage regulation
9.2.4 Synchronization, generator connected to large system, infinite bus concept.
9.3 Synchronous motor
9.3.1 Operating principle
9.3.2 Starting methods
9.3.3 Effect of excitation, V-curve, inverted V-curve, power factor control
9.4 Power angle characteristic of cylindrical rotor machine
9.5 Two-reaction model of salient pole machine
9.6 Power angle characteristic cylindrical salient pole machine

Laboratory:
1) Magnetic Circuit Study.
- Calculate and measure BV & H for a magnetic circuit
- Compare the relative permeabilities of two different sample cores.
2) Two winding transformer
- Carry out o/c test and s/c test on a single phase transformer to evaluate equivalent circuit.
- Examine exciting current harmonics.
3) DC machine Study
- Study speed control using variable armature voltage and variable field current on dc shunt motor
- Study voltage regulation of a dc shunt generator
4) Induction machine study
- Measure torque-speed characters of a three phase induction motor
- Measure power factor and efficiency of the motor at various loading condition
5) Synchronous machine study
- Study of frequency and voltage control of a synchronous generator

Text books:
1) A. E. Fitzgerald, C. kingsley and S.D. Umans, “Electric Machinery” 4th ed. McGraw-Hill Book Company, New York 1983
2) Bhag S. Guru and Huseyin R. Hiziroglu, “Electric Machinory and Trans former”, Harcourt Brace Jovanovich, Inc., New York, 1988.

Instrumentation I

Course Objectives
Comprehensive treatment of methods and instruments for a wide range of measurement problems.

1.0 Instrumentation Systems: (2 hours)
1.1 Functions of components of instrumentation system transduction, signal processing, signal transmission, output indication
1.2 Need for electrical, electronics, pneumatic and hydraulic working media systems and conversion devices
1.3 Analog and digital systems

2.0 Theory of measurements: (3 hours)
2.1 Static performance parameters: accuracy, precision, sensitivity, resolution, and linearity
2.2 Dynamic performance parameter: response time, frequency response and bandwidth
2.3 Error in measurement
2.4 Statistical analysis of errors in measurement

3.0 Transducers: (16 hours)
3.1 Measurement of electrical variables: voltage, current, resistance, frequency, inductance and capacitance
3.2 Measurement of mechanical variables: displacement, strain, velocity, acceleration, and vibration
3.3 Measurement of process variables: temperature, pressure, level, fluid flow, chemical constituents in gases or liquids, pH and humidity
3.4 Measurement of bio-physical variables: blood pressure and myoelectric potentials

4.0 Electrical Signal Processing and transmission: (6 hours)
4.1 Basic Op-amp characteristics
4.2 Instrumentation amplifier
4.3 Signal amplification, attenuation, integration, differentiation, network isolation and wave shaping
4.4 Effects of noise, analog filtering, digital filtering

5.0 Non-Electrical Signal Transmission: (3 hours)
5.1 Pneumatics, electro-pneumatic conversion devices, pneumatic transmission
5.2 Fibre optics, Electro-optic conversion devices, optical communications

6.0 Analog-Digital and Digital-Analog Conversion: (16 hours)
6.1 Analog signals and digital signals
6.2 Digital to analog converters: Weighted resistor type, R-2R ladder type, DAC Errors
6.3 Analog to digital converters: Successive approximation type, Dual ramp type, Flash type, ADC errors

7.0 Digital Instrumentation: (5 hours)
7.1 Sampled data system
7.2 Components of data acquisition system
7.3 Sample and hold circuits
7.4 Interfacing to the computers

8.0 Output Devices: (4 hours)
8.1 Indicators, meters
8.2 Strip chart recorders
8.3 magnetic tape recorders
8.4 4 X-Y plotters

Laboratory:
1.0 Operational Amplifiers in Circuit - Use of Op-amp as a summer, inverter, integrator and differentiator
2.0 Study of Transducers for Measurement of Linear Displacement and Strain
- Use resistive, inductive and capacitive transducers to measure displacement.
- Use strain gauge transducers to measure force.
3.0 Study of Various Transducers For Measurement of Angular Displacement, Angular Velocity, Pressure and Flow.
- use optical, hall effect and inductive transducer to measure angular displacement.
- use tachogenerator to measure angular velocity
- use RTD transducers to measure pressure and flow
4.0 Digital to Analog Conversion - perform static testing of D/A converter
5.0 Analog to Digital Conversion - perform static testing of A/D converter
6.0 Data Recording Devices - study the performance characteristics of strip chart recorder

References:
1. D. M. Consodine, “Process Instruments and Controls Handbook”, third edition, McGraw Hill, 1985
2. S. Wolf and R.F. M,. Smith, “Students Reference Manual for Electronic Instrumentation Laboratories”. Prentice Hall, 1990.
3. E. O. Deobelin “Measurement System: Application and Design”. McGraw Hill, 1990
4. A. K. Sawhney. “A Course in Electronic Measurements and Instrumentation”, Dhanpat Rai and Sons. 1988
5. C. S. Rangan, G. R. Sarma and V.S.V. Mani, “Instrumentation: Devices and Systems”, Tata McGraw Hill Publishing Company Limited, New Delhi, 1992

Electromagnetics

COURSE OBJECTIVES
To impart a good working knowledge of the fundamental laws of static and dynamic electric and magnetic fields and to provide exposure to generation, transmission and measurement techniques involving electromagnetic fields and waves.

1.0 Introduction: (2 hours)
1.1 Coordinate systems
1.2 Scalar and vector fields
1.3 Operations on scalar and vector fields

2.0 Electrostatic Fields in Free Space: (2 hours)
2.1 Coulomb’s law
2.2 Electric intensity
2.3 Electric flux density
2.4 Field lines
2.5 Graphical portrayal of fields

3.0 Gauss’s Law in Integral Form and Applications: (2 hours)
3.1 Conductors, insulators, semiconductors
3.2 Boundary conditions at a conductor surface

4.0 Concept of Divergence: (2 hours)
4.1 Transition from macroscopic to microscopic description
4.2 Divergence theorem
4.3 Gauss’s law in point form and applications

5.0 Electric Energy and Potential: (2 hours)
5.1 Gradient of a scalar point function
5.2 Electric intensity as the negative gradient of a scalar potential
5.3 Conservative fields
5.4 Electric energy density
5.5 Applications

6.0 Electrostatic Fields in Material Media: (2 hours)
6.1 Polarization
6.2 Free and bound charge densities
6.3 Relative permittivity
6.4 Capacitance calculations
6.5 Boundary conditions at the interface between two media
6.6 Applications

7.0 Boundary Value Problems in Electrostatics: (4 hours)
7.1 Laplace’s and Poisson’s equations
7.2 The uniqueness theorem
7.3 One-dimensional boundary value problems
7.4 Two-dimensional boundary value problems
7.5 Separation of variables
7.6 Cut-and-try method
7.7 Relaxation methods, numerical integration
7.8 Graphical field plotting
7.9 Capacitance calculations

8.0 Current and Current Density: (1 hour)
8.1 Conservation of charge
8.2 Continuity equation
8.3 Relaxation time constant
8.4 Applications

9.0 Time-Invariant Magnetic Fields: (3 hours)
9.1 Biot-Savart’s law
9.2 Magnetic intensity and magnetic induction
9.3 Ampere’s law in integral form
9.4 Applications

10.0 Concept of Curl: (3 hours)
10.1 Curl components as circulations per unit area
10.2 Stokes’ theorem
10.3 Ampere’s law in point form
10.4 Scalar and vector magnetic potentials
10.5 Boundary value problems and applications

11.0 Magnetic Forces and Torque: (1 hours)
11.1 Magnetic fields in material media
11.2 Relative permeability
11.3 Boundary conditions
11.4 Magnetic circuits

12.0 Quasi-Static Fields: (2 hours)
12.1 Faraday’s law of electromagnetic induction
12.2 Applications

13.0 Electrodynamic Fields: (2 hours)
13.1 Inadequacy of Ampere’s law derived for direct currents
13.2 Conflict with the continuity equation
13.3 Maxwell’s postulate of displacement current
13.4 Maxwell’s equations in integral and point forms
13.5 Examples

14.0 Wave Equations: (3 hours)
14.1 Uniform plane waves in dissipative media
14.2 Polarization
14.3 Wave impedance
14.4 Skin effect
14.5 A. C. resistance
14.6 Poynting vector
14.7 Reflection and refraction at the interface between two media
14.8 Reflection coefficient
14.9 Standing wave ratio
14.10 Impedance matching
14.11 Quarter wave transformer

15.0 Retarded Potentials: (2 hours)
15.1 Radiation from a dipole antenna
15.2 Wave guides

16.0 Transmission Lines: (8 hours)
16.1 Coaxial, single conductor/earth, two conductor lines
16.2 Field and lumped circuit equivalents
16.3 Characteristic impedance
16.4 Travelling and standing waves, reflection, termination impedance matching
16.5 Short and long lines
16.6 ABCD or h parameters, Y and Z parameters
16.7 Power and signal transmission capability of lines

Laboratory:
1.0 Teledeltos (electro-conductive) paper mapping of electrostatic fields
2.0 Determination of dielectric constant, display of a magnetic Hysterisis loop
3.0 Studies of wave propagation on a lumped parameter transmission line
4.0 Microwave sources, detectors, transmission lines
5.0 Standing wave patterns on transmission lines, reflections, power patterns on transmission lines, reflections, power measurement
6.0 Magnetic field measurements in a static magnetic circuit, inductance, leakage flux

References:
1.0 W.H. Hayt, “Engineering Electromagnetic”, McGraw-Hill Book Company, New York.
2.0 J. D. Kraus and K.R. Carver, “Electromagnetics”, prentice Hall Inc., New York.
3.0 N. Rao, “Elements of Engineering Electromagnetics”

Microprocessors

COURSE OBJECTIVES
To introduce the operation, programming, and application of microprocessors.

1.0 Introduction to Computer Architecture: (4 hours)
1.1 Automated calculator and stored program computer, Von Neuman, Harvard and modified Harvard architectures, principle elements - CPU, memory, control and input/output units
1.2 Simple stored program computer architecture, basic registers
1.3 Introduction to register transfer language (RTL) instruction description

2.0 Computer Instructions: ( 11 hours)
2.1 Introduction to memory reference, inherent, sequence modifying and input/output instructions
2.2 RTL descriptions of assembly level instructions
2.3 RTL description of load accumulator and store accumulator instructions
2.4 RTL description of inherent instructions, clear accumulator, increment and decrement
2.5 RTL descriptions of sequence modifying instructions - unconditional branch instructions, unconditional branch and jump instructions
2.6 RTL descriptions of sequence modifying instructions - conditional branch instructions, branch on accumulator zero, branch on accumulator not zero, signed and not signed arithmetic
2.7 Addressing modes - immediate, absolute, relative, indexed and indirect

3.0 Assembly Language Programming: (10 hours)
3.1 Assembler syntax - labels, instructions (opcodes, mnemonics and operands), directives and comments
3.2 Assembler operation - sample assembly language program and code generation, one pass and two pass assembly
3.3 Macro assemblers, linking assembler directives - .text, .data

4.0 Microcomputer Systems: (8 hours)
4.1 Microcomputer devices - bus structure, synchronous and asynchronous data bus, address bus, read and write operations and timing
4.2 Memory devices - static and dynamic random access memory (RAM), read only memory (ROM), ultraviolet electrically programmable memory (UVEPROM), electrically erasable programmable memory (EEPROM)
4.3 Input/output devices - parallel and serial interfaces, unique and non-unique address decoding
4.4 Synchronizing the computer with peripherals, simple and wait for data transfer wait interfaces
4.5 Serial asynchronous interfaces - ASCII codes, baud rate start bit, stop bit, parity bit, RS-232, RS-432 standards

5.0 Interrupt Operations: (6 hours)
5.1 Interrupt behaviour: complete instruction, save state of processor, optionally mask further interrupts and set program counter to interrupt service routine address
5.2 Interrupt service routine requirements - perform input/output, clear source of interrupt and return from interrupt
5.3 Interrupt priority - maskable and non-maskable interrupts, software interrupts, traps and exceptions
5.4 Vectored, chained and polled interrupt structures
5.5 Peripheral devices using interrupts - parallel and serial interfaces
5.6 Multiprocessing systems - communication between processes, semaphores, resource allocation and deadlock

6.0 Additional Topics: (6 hours)
6.1 Stacks, push and pull instructions
6.2 Static and dynamic variable allocation
6.3 Accumulator and register based computer architectures, reduced instruction set computer (RISC) and compressed instruction set computer (CISC)
architectures, digital signal processing (DSP) processors.

Laboratory:
1) Introduction to a microprocessor system - machine language monitor, simple hardware interface (switch, LED and flip/flop) address and data bus operation for program execution and memory read and write.
2) Assembly language programming - use of assembler, character input/output, arithmetic operations, base conversion, conditional branching, static variable allocation using labels assembler directives
3) Parallel interface programming - wait interfaces, input and output, development of test programs dynamic variable allocation on system stack
4 Serial asynchronous interface programming - wait interfaces, buffered input data, circular buffer
5) Interrupt programming - multiple processes running with varied priority, peripheral data rate determined by an external clock, demonstration of deadlock

References:
1) Z.G Vranesic and S.G.Zaky, “Microcomputer structures”, saunders College publishing, a division of Holt, Rinehart and Winston, 1989.

Electronic Circuits I

COURSE OBJECTIVES
To build on the material presented in Semi Conductor Devices to include the fundamentals of analog integrated circuit (IC) operation. Particular attention will be directed toward understanding operational amplifier operation over the full useful frequency range. Regulated power supplies, power amplifiers and relaxation and sinusoidal oscillators will be discussed.

1.0 Integrated Circuit Technology and Device Models: (10 hours)
1.1 The planar process for integrated circuit fabrication
1.2 Review of dc and ac diode models
1.3 Review of dc and ac JFET models
1.4 Review of dc and ac bipolar transistor models
1.5 Review of dc and ac MOS transistor models

2.0 Operational Amplifier Circuits: (8 hours)
2.1 Bias circuits suitable for IC design
2.2 The widlar currant source
2.3 The differential amplifier
2.4 Active loads
2.5 Output stages

3.0 Operational Amplifier Characterization: (6 hours)
3.1 Input offset voltage
3.2 Input bias and input offset currents
3.3 Output impedance
3.4 Differential and common-mode input impedances
3.5 DC gain, bandwidth, gain-bandwidth product
3.6 Common-mode and power supply rejection ratios
3.7 Higher frequency poles, settling time
3.8 Slew rate
3.9 Noise in operational amplifier circuits

4.0 Power Supplies and Voltage Regulators: (6 hours)
4.1 Half-wave and full-wave rectifiers
4.2 Capacitive filtering
4.3 Zener diodes, bandgap voltage references, constant current diodes
4.4 Zener diode voltage regulators
4.5 Series transistor-zener diode voltage regulators
4.6 Series transistor-zener diode-constant current diode voltage regulators
4.7 Voltage regulators with feedback
4.8 IC voltage regulations

5.0 Untuned and Tuned Power Amplifiers: (7 hours)
5.1 Amplifier classification
5.2 Direct-coupled push-pull stages
5.3 Transformer-coupled push-pull stages
5.4 Tuned power amplifiers
5.5 Power dissipation considerations

6.0 Oscillator Circuits: (8 hours)
6.1 CMOS inverter relaxation oscillator
6.2 Operation amplifier based relaxation oscillators
6.3 Voltage-to-frequency converters
6.4 Sinusoidal oscillators
6.5 Conditions for oscillators
6.6 Amplitude and frequency stabilization
6.7 Swept frequency oscillators
6.8 Frequency synthesizers
6.9 Function generators

Laboratory:
1.0 Study of a discrete component operational amplifier realization.
2.0 Commercial operational amplifier characterization.
3.0 Regulated power supplies
4.0 Power amplifiers
5.0 Relaxation oscillators
6.0 Sinusoidal oscillators

Reference Books:
1) W. Stanely “operational Amplifiers with Linear Integrated circuits”, Charles E. Merrill publishing company, Toronto,1984.
2) J. G. Graeme, “Application of operational Amplifiers: Third Generation Techniques” The burr-Brown Electronic series”, McGraw-Hill, New York, 1973.
3) P. E. Allen and D. R. Holberg, “CMOS Analog Circuit Design”, Holt, Rinehart and Winston, Inc., New York, 1987.
4) A. S. Sedra and K. C. Smith, “Microelectronic Circuits”, 2nd Edition, Holt, Rinehart and Winston, Inc., New York,

Applied Mathematics

Course objectives
This course focuses on several branches of applied mathematics. The student is exposed to complex variable theory and a study of the Fourier and Z transforms, topics of current importance in signal processing. The course concludes with studies of the wave and diffusion equations in cartesian, cylindrical and polar coordinates.

1. Complex Variables (10 hours)
1.1 Function of Complex Variables.
1.2 Taylor series.
1.3 Laurent series.
1.4 Singularities, Zeros and poles.
1.5 Complex integration
1.6 Residues.

2 Z-Transforms (8 hours)
2.6 Linear, time invariant systems, response to the unit spike
2.7 Delay, advance, convolution
2.8 Definition of the Z-transform
2.9 Relation of convolution to the product of transform
2.10 Region of convergence, relationship to causality
2.11 Inverse of the Z-transform by long division and by partial fraction expansion
2.12 Parseval’s theorem

3 The Fourier integral (8 hours)
3.1 The Fourier integral
3.2 The inverse Fourier integral formula.
3.3 Frequency and phase spectra.
3.4 The delta function.

4 Partial differential equations (10 hours)
4.1 Basic concepts.
4.2 Wave equation.
4.3 Diffusion equation.
4.4 The Laplace equation in 2 and 3 dimensions.
4.5 Polar coordinates.
4.6 Cylindrical coordinates.
4.7 Spherical coordinates.
4.8 Bessels and Legendre equations.

5. Linear Programming (9 hours)
5.1 The simplex method.
5.2 The canonical forms of solutions.
5.3 Optimal values.

Textbook:
1.0 E. Kreyszig, “Advanced Engineering Mathematics”, Fifth Edition, Wiley, New York.

Reference for Z-Transform:
1.0 A.V. Oppenheim, “Discrete-Time Signal Processing”, Prentice Hall, 1990.
2.0 K. Ogota, “Discrete-Time Control Systems”, Prentice Hall, Englewood Cliffs, New Jersey,

Logic Circuits

Course Objectives
An introduction to logic design. The main goal is to develop methods of
designing, constructing and building logic circuits.

1.0 Number System: (6 hours)
1.1 Decimal system and binary system
1.2 Base conversion methods
1.3 Complements of numbers
1.4 Basic arithmetic of binary numbers, use of 2’ s complement
1.5 Signed and unsigned numbers
1.6 Fractions conversion
1.7 Octal, hexadecimal and binary coded decimal (BCD)
1.8 Gray code, alphanumeric code
1.9 Error codes

2.0 Digital Design Fundamentals: (11 hours)
2.1 Logic gates, symbols, truth tables
2.2 Realization of logic gates using diodes, using NAND / NOR gates
2.3 Boolean algebra, DeMorgan’s law
2.4 The Karnaugh map, don’t care conditions
2.5 Minimization theorems and reduction of K-map
2.6 Product- of-sum and sum-of -product realization of K-map
2.7 Functional test vectors

3.0 Digital System Building Blocks: (11 hours)
3.1 Combinational Digital System
3.1.1 Half adder, full adder, n-bit adder
3.1.2 Encoder, decoder, multiplexer, demultiplexer
3.1.3 ROM, PLA
3.1.4 Practical aspects – fan-in, fan-out, propagation delay
3.2 Sequential Digital System
3.2.1 Difference between combinational and sequential circuit
3.2.2 The concept of memory, flip-flop as 1-bit register
3.2.3 Clock, Rising edge, falling edge and level triggering
3.2.4 Setup time, hold time, clock skew
3.2.5 S-R, J-K, Master-slave, T, and D type flip-flops, latches
3.2.6 Shift registers
3.2.6.1 Serial to parallel converter
3.2.6.2 Serial in serial out register
3.2.6.3 Parallel to serial converter
3.2.6.4 Parallel in parallel out register
3.2.6.5 Right shift, Left-shift register
3.2.6.6 Digital delay line
3.2.6.7 Sequence generator
3.2.6.8 Shift register ring and twisted ring counter
3.2.7 Ripple counter, synchronous counter, applications

4.0 Sequential Machines: (10 hours)
4.1 Synchronous machines
4.1.1 Clock driven models and state diagrams
4.1.2 Transition tables, Redundant states
4.1.3 Binary assignment
4.1.4 Use of flip-flops in realizing the models
4.2 Asynchronous machines
4.2.1 Hazards in asynchronous systems and use of redundant branch
4.2.2 Allowable transitions
4.2.3 Flow tables and merger diagrams
4.2.4 Excitation maps and realization of the model

5.0 Digital Design Examples: (7 hours)
5.1 Design study: Character Generators
5.1.1 Dot matrix of a character
5.1.2 Printed characters
5.1.3 CRT single-character waveform
5.1.4 Display of one character
5.1.5 Display of a line of characters
5.2 Design work: Serial adder
5.2.1 Block diagram and design issues
5.2.2 Concept of tri-state logic and bus
5.2.3 The registers with a common bus
5.2.4 The summing unit

Laboratory : The laboratory exercises in this course consist of both CAD and hardware construction. The hardware experiments involve the use of logic patch boards for construction of gates array and memory based circuits.

1.0 Safe Laboratory procedures
2.0 AND, OR, and INVERTER gates
3.0 DeMorgan’s law and familiarization with NAND and NOR gates.
4.0 Familiarization with binary addition and subtraction.
5.0 Construction of true complement generator
6.0 Encoder, decoder, and multiplexer.
7.0 Latches, RS, Master-slave and T type flip flops.
8.0 D and J-K type flip flops.
9.0 Shift registers
10.0 Ripple Counter, Synchronous counter
11.0 Familiarization with computer package for logic circuit design.
12.0 Design digital circuits using CAD.

References:
1.0 M. M. Mano, “Digital Logic and Computer Design”. Prentice Hall, Englewood Cliffs, N. J. 07632, 1979.
2.0 William I. Fletcher, “An Engineering Approach to Digital Design”. Prentice Hall of India, New Delhi 110 001, 1990.
3.0 Millman-Halkias, “Integrated Electronics”. McGraw-Hill, 1986.
4.0 D. L. Dietmeyer, “Logic Design of Digital systems”. Allyn and Bacon, Inc., Massachusetts 02194, 1982.
5.0 A. F. Malvino, “Digital Electronics & Computer” McGraw Hill

Electric Circuits II

Course Objectives: To continue work in Electric Circuits I including the use of the Laplace Transform to determine the time and frequency domain responses of electric circuits.

1.0 Matrix Methods in Network Analysis: (4 Hours)
1.1 Mesh Analysis
1.2 Nodal analysis

2.0 Review of Classical Solution if Ordinary Differential Equations With Constant Coefficients: (5 hours)
2.1 First order differential equations, RL and RC circuits
2.2 General and particular solution
2.3 Initial conditions on L's and C's
2.4 Natural unforced response of LR and CR circuits from initial conditions, time
constant
2.5 Complete transient and steady state response of first order system including
initial conditions and applied forcing functions.

3.0 Complete Time Domain Response of Second and Higher Order System: (5 hours)
3.1 Initial conditions
3.2 Transient and steady state components of response including initial conditions
3.3 RLC resonance, damping factors, high and low Q circuits

4.0 Review of Laplace Transform: (4 hours)
4.1 Definitions and properties valuable for network analysis
4.2 Laplace transform of common forcing functions
4.2.1 Step and shifted step functions
4.2.2 Ramp and impulse functions
4.2.3 Sinusoidal functions
4.3 Real translation and complex translation theorem
4.4 Partial fraction expansion

5.0 Use of Laplace Transform Techniques for Solution of Ordinary Differential Equations with Constant Coefficients: (4 hours)
5.1 Transient and steady-state responses of networks to step, ramp, impulse and
sinusoidal forcing functions with and without initial conditions on L's and C's
5.1.1 First order systems
5.1.2 Second and higher order systems

6.0 Transfer Functions, Poles and Zeros of Networks: (4 hours)
6.1 Concept of complex frequency
6.2 Transfer functions for two part networks
6.3 Poles and zeros of network functions
6.4 Relationship between pole/zero and system time response

7.0 Frequency Response of Networks: (4 Hours)
7.1 Magnitude and phase response
7.2 Bode diagrams
7.3 Band width, high-Q and low-Q circuits
7.4 Basic concept of filters, high-pass, band stop, low and band-pass filters

8.0 Fourier Series and transform: (5 hours)
8.1 Basic concept of Fourier series and analysis
8.2 Evaluation of Fourier coefficients for periodic non-sinusoidal waveforms in electric networks
8.3 Introduction of Fourier transforms

9.0 Two-port Parameters of Networks: (6 hours)
9.1 Definition of two-port networks
9.2 Short circuit admittance parameters
9.3 Open circuit impedance parameters
9.4 Transmission Short circuit admittance parameters
9.5 Hybrid parameters
9.6 Relationship and transformations between sets of parameters
9.7 Applications to filters
9.8 Applications to transmission lines

10.0 State Space Analysis: (4 hours)
10.1 Concept of state and state variables
10.2 State space representation of network equations

Laboratory:
1.0 Transient Response in first Order System Passive Circuits
- measure step and impulse of RC and RL circuits using oscilloscope
- relate time responses to analytical transfer function) calculations
2.0 Transform Response in Second Order System Passive Circuits
- measure step and impulse response of RLC series and parallel circuits using oscilloscope
- relate time responses to transfer functions and pole-zero configuration
3.0 Frequency Response of first and Second Order Passive Circuits
- measure amplitude and phase response and plot Bode diagrams for RL, RC and RLC circuits
- relate body diagrams to transfer functions and pole-zero configuration circuits.
4.0 Electric circuits Simulation Study
- Use SPICE program to simulate circuit and tests carried out in lab 1-3 and compare result from measurement with those from SPICE
5.0 Measurement of Harmonic Content of a Voltage
- Calculate Fourier coefficients for a square wave and variety this by harmonic measurements of a signal form a square wave generator using harmonic analyser.
- Repeat for a half wave rectified wave form using a diode and a resistor

Reference Books:
a) M.E. Van Valkenburg, "Network Analysis", third Edition, Prentice hall, 1995
b) William H. Hayt. Jr. & Jack E. Kemmerly, “Engineering Circuits Analysis", Forth edition, McGraw Hill International, Editions, Electrical Engineering Series, 1987.
c) Michel D. Cilletti, "Introduction to Circuits Analysis and Design", Holt, Hot Rinehart and Winston International Edition, New York, 1988.

Mathematics III

COURSE OBJECTIVES
The purpose of this course is to round out the student's preparation for more sophisticated applications with an introduction to linear algebra, a continuation of the study of ordinary differential equations and an introduction to vector calculus.

1. Matrices and determinants (8 hours)
1.1 Matrix and determinants.
1.2 Vector spaces
1.3 Linear transformations
1.4 System of linear equations, Gauss elimination.
1.5 Rank, matrix inversion.
1.6 Eigen values, eigen vectors.

2 Fourier series (4 hours)
2.1 Fourier series,
2.2 Periodic functions
2.3 Odd and even functions.
2.4 Fourier series for arbitrary range.
2.5 Half range Fourier series.

3. Laplace transforms (8 hours)
3.1 Laplace transforms.
3.2 Standard L- transforms.
3.3 Inverse laplace transforms.
3.4 Applications.

4 Vector Calculus (7 hours)
4.1 Vector Calculus.
4.2 Differentiation and Integration of Vectors.
4.3 Divergence.
4.4 Gradient curl.

5 Line, surface and volume integrals (18 hours)
5.1 Line integrals.
5.2 Surface and volume integrals.
5.3 Integral transformation theorems- Stoke's, Gauss and Green's theorems.


Textbook
1.0 E. Kreszig, "Advanced Engineering Mathematics", Fifth Edition, Wiley, New York.
2.0 M. M. Guterman and Z.N. Nitecki, "Differential Equations, a First Course", 2nd Edition, Saunders, New York

Tuesday, September 9, 2008

Engineering Drawing II

COURSE OBJECTIVES: To continue ENGINEERING DRAWING I to the point of producing intelligible working drawings.

1.0 Pictorial Drawings: (12 hours)
1.1 Introduction: Characteristics, advantages and disadvantages
1.2 Axonometric Projection: Isometric, Diametric and trimetric drawing
1.3 Oblique projection
1.4 Perspective projection

2.0 Design and Production Drawings-Machine Drawings: (12 hours)
2.1 Introduction: Production of complete design and assembly drawings
2.2 Fundamental techniques
Size and location dimensioning
Placement of dimension lines and general procedures
Standard dimensioning practice (SI system)
2.3 Limit Dimensioning
Nominal and basic size, allowance, tolerance, limits of size, clearance fit,
interference fit
Basic hole system and shaft systems
2.4 Threads and Standard Machine Assembly Elements
Screw threads: ISO standards, representation and dimensioning
Fasteners: Types and drawing representation
Key, collars, joints, springs bearings
2.5 Assembly Drawings
Drawing layout, bill of materials, drawing numbers

3.0 Welding and Riveting: (4 hours)
3.1 Representing Joints and Welds for Gas, Arc and Resistance Welding
Types: spot, seam, flash, fillet, back-back, surface and upset welds
3.2 Drawing symbols for welds
3.3 Rivets and riveted joints
Types and drawings representation

4.0 Piping Diagrams: (4 hours)
4.1 Piping, Tubing and Types of Joints
4.2 Specification of Threads, Fittings and Valves
4.3 Standard Piping Symbols
4.4 Piping Drawings and Symbolic Diagrams

5.0 Structural Drawings: (8 hours)
5.1 Steel Construction
Structural steel shapes
Bolted, welded and riveted connections
Detailing practices for structural steel
5.2 Wood Construction
Timber connections and bolted joints
Detailing practice
5.3 Concrete Construction
Slab and beam configurations
Steel reinforcement and prestressing
5.4 Masonry and Stone Construction

6.0 Electrical and Electronic Diagrams: (8 hours)
6.1 Standards
6.2 Types of Diagrams: Line diagrams, schematics and pictorials
6.3 Symbols for Components
6.4 Printed Circuits
6.5 Integrated Circuits

7.0 Topographical Drawings: (4 hours)
7.1 Topographical Maps
7.2 Cadastral Maps
7.3 Engineering Maps

8.0 Graphs, Charts and Nomograms: (4 hours)
8.1 Rectangular Coordinate Graphs
8.2 Charts
8.3 Nomograms

9.0 Reproduction and Duplicating of Engineering Drawings: (4 hours)
9.1 Blue Prints, Brown Prints and Blue-Line Prints
9.2 Ozalid Prints, Black and White (Diazo Prints)
9.3 Xerox Prints
9.4 Duplicate Tracings
9.5 Photocopies
9.6 Microfilming
9.7 Glass Cloth for Layouts

Texts and/or References:
1. "Fundamentals of Engineering Drawing", W.J. Luzadder, Prentice Hall, 8th Edition, 1981
2. "Engineering Drawing and Graphic Technology", T.E. French, C.J. Vierck and R.J. Foster, McGraw Hill, 1981
3. "Technical Drawing", F.E. Giesecke, A. Mitchell, H. C. Spencer and J. T. Dygdone, Macmillan, 8th Edition, 1986

LABORATORIES: 3 hr/week, 12 weeks
1. Isometric and Oblique Drawings
2. Oblique Drawing
3. Perspective Drawing
4. Machine Drawings; Sizing and dimensioning
5. Machine Drawings; Detail drawings, dimensioning and tolerancing
6. Machine Drawing; Assembly drawing
7. Threads and Fasteners
8. Welding, Jointing and Piping
9. Structural Drawing
10. Structural Drawing (cont.)
11. Electrical and Electronics Diagrams
12. Electrical and Electronics Diagrams (cont.)
13. Topographical and Engineering Maps
14. Graphs, Charts and Nomograms
1.5. Drawing Reproduction and Duplication

Electric Circuits I

COURSE OBJECTIVES: To introduce dc and ac circuit analysis.

1.0 Circuit Elements: (4 hours)
1.1 Mathematical description of the functional behavior of resistors, capacitors
and inductors in terms of current and voltage relationships
1.2 Basic physical structure of resistors, capacitors and inductors
1.3 Departures from ideal (pure R, L, or C) characteristics
1.4 Voltage and current sources, mathematical concepts and real physical devices as sources, batteries, photo cells, generators, etc.

2.0 Series and Parallel Circuits: (4 hours)
2.1 Resistive circuits with dc excitation
2.2 Resistors in parallel, resistors in series
2.3 Potential drop and potential rise
2.4 Circuits fed from voltage sources, from current sources
2.5 Output resistances of sources and effects on terminal characteristics
2.6 Power and energy considerations in dc circuits

3.0 Kirchhoff’s Laws: (7 hours)
3.1 Kirchhoff’s loop voltage and branch current laws for dc circuits
3.2 Loop and nodal formulations of circuit equations
3.3 Matrix methods of writing and solving simultaneous equations of networks

4.0 Network Analysis Theorem: (7 hours)
4.1 Maximum power transfer
4.2 Thevenin’s equivalent circuit
4.3 Norton’s equivalent circuit
4.4 Reciprocity

5.0 Single Phase AC Circuit Analysis: (10 hours)
5.1 Series, parallel and network circuits with ac excitation and resistances only
5.2 The concept of complex impedance and admittance
5.3 Sinusoidal excitation of inductive and capacitive reactance and complex impedance
5.4 Concept of time phase differences between various sinusoidal quantities
5.5 Sinusoidal waveform and phasor representation of ac quantities

6.0 Power and Energy in AC Circuits: (7 hours)
6.1 Effective values of sinusoidal and other waveforms of voltage and currents
6.2 Power and energy balances in ac excited circuits containing various combination of resistors, capacitors and inductors
6.3 Instantaneous power, average real power, reactive power, power factor
6.4 Measurement of real and reactive power

7.0 Three Phase Circuit Analysis: (6 hours)
7.1 Ac circuits with several ac sources
7.2 The three phase excitation case
7.3 Phase relationships between line and phase quantities in three phase circuits
7.4 Real and reactive power in three phase circuits
7.5 Measurement of real and reactive power
7.6 Single phase representation of balanced three phase circuits
7.7 Power factor and power factor correction


Laboratory:
1.0 Introductory work
- principle of d’Arsonval movement
- use of voltmeter and ammeter
- multirange meters
- simple V and I measurement in lamp circuit;
determine R = f(I) for incandescent light bulb

2.0 Kirchhoff’s Voltage and Current Laws
- Use dc d’ Arsenal meters to explore series, parallel and networked resistor combinations
- evaluate power from V and I
- note loading effects of meter

3.0 Measurement of Alternating Quantities Using Iron Vane Meters
- R, RL, RC circuits with ac excitation
- ac power, power factor, vars, phasor diagrams

4.0 The Oscilloscope (Dual Channel)
- examine signal generator output using oscilloscope
- examine phase relationships between signals in RL, RC circuits
- measure amplitude, frequency and time with the oscilloscope

5.0 The Dynamometer Wattmeter
- basic power measurement in dc circuits - meter loss compensation
- power, vars, power factor measurement in ac RL and RC circuits
- phasor diagrams

6.0 Measurements of Average and Effective Values
- use ac circuits with rectifier to generate non-sinusoidal wave. Measure
average and rms values of currents and voltages using dc and ac meters
- examine waveforms (above) with oscilloscope and calculate average and rms
values

7.0 Series and Parallel Resonant Circuits
- use audio signal generator and RLC resonant circuits to demonstrate
resonance phenomena; use oscilloscope
- use a resonant circuit to extract a particular frequency signal from noise

8.0 Three-phase AC Circuits
- measure currents and voltages in three-phase balanced ac circuits
- prove wye-delta transformation
- exercise on phasor diagrams for three-phase circuits

9.0 Three-phase Power Measurement
- two wattmeter method of power measurement in R, RL, and RC three-phase circuits
- watts ratio curve

10.0 Electric Meters for Voltage and Current Measurement
- voltage measurements in high impedance circuits using moving coil and electronic voltmeters and oscilloscope
- electric power meters and their use

11.0 Bridge Circuits for Electrical Measurements
- potentiometers for voltage measurement
- dc and ac bridges for R, L, C measurements-Wien, Maxwell, Schering bridges

12.0 Electric Circuit Simulation Study
- introduce microcomputer simulation of circuits using SPICE (or other) software
Textbook :
1.0 J. R. Cogdell, “Foundations of Electrical Engineering”, prentice Hall, Englewood Cliffs, New Jersey, 1990.
2.0 Paul W.Tuinenga, “SPICE - A Guide to Circuit simulation and Analysis using Pspice”, prentice Hall, Englewood Cliffs, New Jersey, 1988.

Electrical Engineering Materials

COURSE OBJECTIVES:
To provide a basic understanding of the electric and magnetic properties of materials used in electrical and electronics engineering.

1.0 Theory of Metals: (6 hours)
1.1 Elementary quantum mechanical ideas
1.2 Free electron theory
1.3 Energy well model of a metal
1.4 Density of states function
1.5 The Fermi-Dirac distribution function
1.6 Thermionic emission
1.7 Work function
1.8 The Fermi level at equilibrium, contact potentials

2.0 Free Electron Theory of Conduction in Metals: (6 hours)
2.1 Thermal velocity of electrons at equilibrium
2.2 Lattice scattering, mean free time between collisions
2.3 Drift velocity of electrons in an electric field
2.4 Diffusion of electrons, diffusion coefficient, Einstein’s relationship between mobility and diffusion coefficients
2.5 Chemical and physical properties of common conducting materials such as Au, Ag, Cu, Al, Mn, Ni, etc.

3.0 Conduction in Liquids and Gases: (2 hours)
3.1 Ionic conduction in electrolytes
3.2 Electrical conduction in gases
3.3 Arc discharges, electric breakdown

4.0 Dielectric Materials: (6 hours)
4.1 Macroscopic effects
4.2 Polarization, dielectric constant
4.3 Dielectric losses, frequency and temperature effects
4.4 Dielectric breakdown
4.5 Ferroelectricity and piezoelectricity
4.6 Properties of common dielectrics such as glass, porcelain, polyethylene, pvc, nylon, bakelite, rubber, mica, transformer oils, etc.

5.0 Magnetic Materials: (8 hours)
5.1 Ferromagnetism, ferrimagnetism, paramagnetism
5.2 Domain structure
5.3 Hysterisis loop, eddy current losses
5.4 Soft magnetic materials
5.5 Fe-si alloys, Ni-Fe alloys
5.6 Ferrites for high frequency transformers
5.7 Square loop materials for magnetic memory, relaxation oscillators
5.8 Hard magnetic materials such as carbon steels, Alnico alloys and barium ferrites

6.0 Semiconducting Materials: (12 hours)
6.1 Band structure of Group IV materials, energy gap
6.2 Density of states function
6.3 Fermi-Dirac distribution function
6.4 Hole and electron densities in an intrinsic crystal
6.5 Effective densities of states, intrinsic concentration
6.6 Fermi level of energy at equilibrium
6.7 Group III and Group IV impurities, acceptors and donors, p and n-type materials
6.8 Energy band diagrams for uniformly-doped and graded p- and n-type materials
6.9 Generation and recombination of electrons and holes, concept of lifetime
6.10 Mobility and diffusion coefficients for electrons and holes in semi conductors
6.11 Transport and continuity equations for electrons and holes
6.12 Concept of diffusion length
6.13 Energy band diagram for a p-n junction, contact potentials
6.14 Metal-semiconductor contacts
6.15 Brief introduction to Crystallography/metallurgy (Phase diagram, transport phenomenon)

7.0 Semiconductor Materials Processing: (5 hours)
7.1 Crystal growing
7.2 Doping by solid state diffusion, ion implantation
7.3 Oxidation
7.4 Photolithography the planar process
7.6 Metallization contacts

Textbooks:
1.0 R.A. Colcaser and S.Diehl-Nagle, “Materials and Devices for Electrical Engineers and Physicists, McGraw-Hill, New York, 1985.
2.0 R.C. Jaeger, “Introduction to Microelectronic Fabrication- - Volume IV”, Addison- Wesley publishing Company, Inc.,1988.

Chemistry

COURSE OBJECTIVES
To develop the basic concepts of Physical Chemistry, Inorganic Chemistry and Organic Chemistry relevant to problems in engineering.


Group A (Physical Chemistry )

1.0 Atomic Structure (5 hours)
1.1 Limitations of Bohr's Theory
1.2 Sommerfeld's extension of Bhor model of atom ( no derivation) Wave mechanical model of atom
1.3 De-Broglee's equation, matter waves and electromagnetic waves
1.4 Heisenberg's uncertainty principle, uncertainty principle and probability Concept.
1.5 Derivation of Schrodinger's equation (time Independent), significance of wave function, quantum numbers and orbital, radial and angular probability distribution graphs and shapes of s, p, d orbitals.
1.6 Pauli's exclusion principle, Hund's rule of maximum multiplicity aufbau principle, electronic configuration using s, p, d, f orbitals, stability of half filled and completely filled orbitals.

2.0 Ionic equilibrium (4 hours)
2.1 Strong and weak electrolytes
2.2 Ostwald's dilution law and its limitation
2.3 pH and pH scale
2.4 Common ion effect in ionic equilibria.
2.5 Buffer and pH of buffer

3.0 Electro Chemistry (4 hours)
3.1 Electrolytic cells and Galvanic cells
3.2 Single electrode potentials and normal hydrogen electrode, elctro-chemical series
3.3 Nernst's equation and determination of electrode potential and cell potential under non-standard conditions
3.4 Corrosion of metals and its prevention.

4.0 Chemical energetics (5 hours)
4.1 Internal energy (E) and I law of thermodynamics.
4.2 Isothermal irreversible expansion of an ideal gas, isothermal reversible expansion of an ideal gas.
4.3 Experimental determination of E(using bomb Calorimeter)
4.4 Enthalpy (H) and experimental determination of H.
4.5 Enthalpy of Physical and Chemical changes
4.6 Hess's law of constant heat summation
4.7 Enthalpy change from bond energy
4.8 Molar heat Capacities, relation between Cp and Cv
4.9 Variation of heat of reaction with temperature ( Kirchhoff's equations)
4.10 Calorific values of fuels and food.


Group B (Inorganic Chemistry)

5.0 Chemical Bonding (4 hours)
5.1 Valence bond theory
5.2 A brief treatment of the Covalent bond with valence bond theory.
5.3 Types of overlapping
5.4 Hybridization
5.5 Condition necessary for hybridization
5.6 Characteristic of hybrid orbitals
5.7 Types of hybridization - Sp, Sp2, Sp3, dsp2, dsp3 and d2Sp3

6.0 Co-ordination Complexes (5 hours)
6.1 Double Salt and complex Salt
6.2 Werner's Co-ordination theory
6.3 Nomenclature of Co-ordination Complexes.
6.4 Electronic interpretation in Co-ordination.
6.5 Bonding in Co-ordination compounds - only valence bond theory.
6.6 Applications of valence bond theory - Octahedral complexes, Tetrahedral
complexes and Square planer complexes.
6.7 Application of Co-ordination complexes.

7.0 Transition elements - 3rd Series, with reference to (5 hours)
7.1 Electronic configuration.
7.2 Metallic character
7.3 Oxidation State
7.4 Colour formation
7.5 Magnetic properties
7.6 Tendency to form complexes.

8.0 Silicones - Properties and uses (1 hour)


Group C (Organic Chemistry)

9.0 Stereochemistry (3 hours)
9.1 Stereoisomerism
9.2 Geometrical isomerim
9.3 Optical Isomerisum

10.0 Four general types of organic reactions (4 hours)
10.1 Substitution reaction SN
1 and SN
2 reaction
10.2 Addition
10.3 Elimination E1 and E2 reactions
10.4 Rearrangement.

11.0 Organometallic compounds (1 hours)
Preparation of Grignard's reagent, properties and uses

12.0 Aromatic Compounds (1 hours)
Toluene- preparation, Properties and uses

13.0 Explosives (2 hours)
13.1 Simple idea about low and high explosives.
13.2 TNT, TNG and nitrocellulose preparation and uses

14.0 Plastics and Polymers (3 hours)
14.1 Polymers and Polymerization.
14.2 Types of Polymerization reaction.
14.3 Types of Polymers
14.4 Synthetic fibres Polystyrene, Teflon, nylon, terylene or dacron.


Text books and References.

Physical Chemistry:
Text:
1. Selected topics in physical chemistry. - Motikaji Sthapit
References:
1. Principles of physical chemistry - Marron & Prutton.
2. Essentials of physical chemistry. - Bahl & Tuli

Inorganic chemistry:
Text:
1. Advanced Inorganic chemistry - Satyaprakash, R. D. Modan., G.D. Tuli
References:
1. Concise Chemistry - A.J. Lee
2. Inorganic chemistry - R. C. Agrawal.

Organic chemistry:
Text:
1. Organic chemistry. - Morrison and Boyd
References:
1. Organic chemistry - B. S. Bahl
2. Mechanism in organic chemistry - Peter Sykes.

Chemistry Laboratory F M:25
EG403SH Internal: 10
External: 15
1. To determine the alkalinity of water samples A&B.
2. To determine the hardness of water Complexometrically using EDTA.
3. To determine the amount of free chlorine in water by Standardization of hypo Solution.
4. To prepare the standard buffer solutions using acetic acid & sodium acetate and to
measure the approximate pH of the given unknown solution by universal indicator
method.
5. To prepare the standard buffer solutions using ammonia and ammonium chloride and to
measure the approximate pH of the given unknown solution by using universal indicator.
6. To determine the relative and absolute viscosity of the given liquids by ostwald's
Viscometer.
7. To find the surface tension of the liquids by stalagmometer and compare surface tension
of the cleaning powder of detergents.
8. To measure the quantity of electricity required to deposit one mole of Copper.
9. To purify petroleum and crude alcohol by fractional distillation.