Showing posts with label First Semester. Show all posts
Showing posts with label First Semester. Show all posts

Tuesday, September 9, 2008

Applied Mechanics

Course Objectives
To develop an understanding of mechanical equilibrium and of Newton’s laws of motion by application to a wide range of problems of engineering interest.

1.0 General Principles of Statics (1 hour)
1.1 Concept of equilibrium of particles
1.2 Fundamental quantities of length, time and mass
1.3 SI system of units
1.4 Significant figures for calculations

2.0 Vectors (1 hour)
2.1 Force and position vectors
2.2 Vector operations: addition, subtraction, dot product, cross product, scalar and triple product, unit vectors.

3.0 Equilibrium of a particle (2 hours)
3.1 Condition of equilibrium
3.2 Free-body diagrams
3.3 Coplanar force systems; transmissibility, force resultant
3.4 Three-dimensional force systems

4.0 Force System Resultants (2 hours)
4.1 Cross products
4.2 Moment of a force - scalar and vector representation
4.3 Moment of a couple - scalar and vector representation
4.4 Reduction of systems of forces and moments to a single force and couple
4.5 Resultant force and moment for a system of forces

5.0 Equilibrium of a Rigid Body (3 hours)
5.1 Conditions for equilibrium
5.2 Equilibrium in two dimensions; equations, two and three force members
5.3 Equilibrium in three dimensions; equations, constraints for rigid bodies

6.0 Friction (2 hours)
6.1 Laws of friction, static and dynamic coefficients of friction, friction angle
6.2 Application to static problems

7.0 Planar Trusses, Frames and Mechanisms (3 hours)
7.1 Simple trusses
7.2 Types of frames; determinate and indeterminate
7.3 Degrees of freedom; structure or mechanism
7.4 Internal forces from equilibrium; examples for trusses, frames and mechanisms

8.0 Beams (3 hours)
8.1 Classification of beams, loads and supports
8.2 Determining internal shear force, axial force and bending moment at a section

9.0 Fluid Statics (2 hours)
9.1 Distribution of pressure on submerged surfaces
9.2 Centre of pressure and resultant force

10.0 Centre of Gravity and Centroid (2 hours)
10.1 Centres of gravity
10.2 Centroids of lines, areas and volumes
10.3 Second moment of and area

11.0 Moments of Inertia (2 hours)
11.1 Moments of inertia by integration
11.2 Parallel axis theorem
11.3 Moments of inertia of composite areas

12.0 Kinematics of a particle (3 hours)
12.1 Rectilinear and curvilinear motion
12.2 Uniformly accelerated motion
12.3 Projectile motion
12.4 Rectangular, normal and tangential components of acceleration

13.0 Kinetics of a Particle (3 hours)
13.1 Newton’s laws and equations of motion
13.2 Applications using rectangular or normal and tangential components
13.3 Principle of work and energy
13.4 Work, power and efficiency
13.5 Linear impulse and momentum
13.6 Angular impulse and momentum

14.0 Planar Kinematics of a Rigid Body (4 hours)
14.1 Translation, rotation and general plane motion
14.2 Relative velocity and acceleration analysis
14.3 Applications: rigid bodies, simple mechanisms and linkages

15.0 Force Analysis for Rigid Bodies (4 hour)
15.1 Equations of motion
15.2 Need for moments of inertia
15.3 Translation, pure rotation and general plane motion
15.4 Constrained motion in a plane

16.0 Principle of Work and Energy for Rigid Bodies (3 hours)
16.1 Kinetic energy
16.2 Potential energy; gravitational forces and elastic elements
16.3 Conservative and non-conservative systems
16.4 Work by external forces; applied loads, frictional force

17.0 Linear and Angular Impulse and Momentum for Rigid Bodies (3 hours)
17.1 Conservative of linear and angular momentum
17.2 Impulse motion and accentric impact

Textbook:
1.0 F.P. Beer and E.R. Johnson, “Vector Mechanics for Engineers, Statics and Dynamics”, Third Edition, McGraw-Hill
2.0 R.C. Hibbeler, “Engineering Mechanics, statics and Dynamics”, Fifth Edition, MacMillan publishers, New York.
3.0 F.P. Beer and E.R. Johnson, “Mechanics of Materials”, McGraw- Hill, 1981.

Workshop Technology

Course Objectives: To provide instruction and practical workshop experience in
basic machine shop metal-working operations.

1.0 Bench Tools and Basic Hand Operations: (8 hours)
1.1. Familiarization with tools and their use
1.2. Machinist’s hammers
1.3. Types of screw drivers
1.4. Use and sharpening of punches, chisels, chippers and scrapers, scribers
1.5. Classification of files
1.6. Types of pliers and cutters
1.7. Types of wrenches: open end, box end, combination, adjustable, socket, offset, twelve point ratchet, strap wrench, pipe wrench, spanner wrenches, Allen wrenches
1.8. Hacksaws
1.9. Bench vises
1.10. Hand drills
1.11. Taps and dies
1.12. Hand shears
1.13. Rules, tapes and squares
1.14. Soldering and brazing equipment
1.15. Rivet types

2.0 Hand Working Operations: (8 hours)
2.1 Choice of blades and sawing techniques
2.2 Filling to obtain flat and parallel surfaces, square corners, roughing and finishing operations
2.3 Tapping holes and threading rods
2.4 Scribing layout patterns
2.5 Shearing and cutting sheet metal
2.6 Soldering
2.7 Safety
2.8 Riveting
3.0 Power Tools: (4 hours)
3.1 Power hacksaw
3.2 Horizontal cutoff band saw
3.3 Vertical band saw and cutting operations
3.4 Bench and hand-held grinders
3.5 Belt and disk sanders
3.6 Hand-held power drills
3.7 Safety aspects

4.0 Measuring and Gagging: (4 hours)
4.1 Semi-precision tools such as rules, scales, try squares, inside/outside clippers, depth gages, feeler gages
4.2 Precision tools such as micrometers, vernier calipers, vernier height gages, telescoping gages, hole gages, bevel protractors, dial indicators, gage blocks and surface plates

5.0 Drills and Drilling Processes: (4 hours)
5.1 Types of drill presses
5.2 Work holding attachments and accessories
5.3 Cutting tools
5.4 Geometry and grinding of drill bits
5.5 Drilling, countersinking, reaming, lapping
5.6 Cutting speeds
5.7 Safety

6.0 Machine Tools: (12 hours)
6.1 General safety considerations
6.2 Physical construction and types of engine lathes
6.3 Facing and straight turning operations
6.4 Threading
6.5 Tool selection and feed rates
6.5 Horizontal and vertical shapers
6.6 Applications of shapers
6.7 Types and construction of milling machines
6.8 Selection of milling machine cutters and accessories, operations
6.9 Grinding machines
6.10 Horizontal surface grinding
6.11 Plain cylindrical grinding

7.0 Material Properties: (8 hours)
7.1 Tool materials such as low, medium and high carbon steels, hot and cold rolled steels, alloy steels, carbide and ceramic materials
7.2 Heat treating methods for steels: hardening, tempering, annealing, normalizing, quenching
7.3 Non-ferrous materials such as brass, bronze, aluminium: comparative properties and machinability

8.0 Sheet Metal Work: (4 hours)
8.1 Tools
8.2 Marking and layout
8.3 Bending and rolling operations
8.4 Cutting operations

9.0 Metal Joining: (8 hours)
9.1 Safety considerations
9.2 Soldering methods and practices
9.3 Brazing methods and materials
9.4 Practice of torch brazing
9.5 Oxygen-acetylene welding methods and practices
9.6 Selection of welding rods
9.7 Arc welding methods and practices
9.8 Resistance welding
9.9 Electric arc welding

Textbooks and Reference Books:
1.0 J.Anderson and E.E. Tatro, “Shop Theory”, Mcgraw-Hill, 5th Edition, 1942.
2.0 O.D.Lascoe, C.A.Nelson andH.W.Porter, “Machine shop operations and setups”, American Technical society, 1973.
3.0 “Machine shop practice - volume I”, Industrial press, New York, 1971.
4.0 “Machine shop practice volume II”, Industrial press, New York, 1971.
5.0 K.Oswald, “Technology of Machine Tools”, McGraw Hill-Ryerson, 3rd Edition.
6.0 Oberg, Jones and Horton, “Machinery’s Handbook”, 23rd Edition, Industrial press, New York.

Workshop Practice: 3 hours per week for 12 weeks
1.0 Bench tools and hand operations: measuring, marking, layout, cutting, filling, drilling, tapping, assembly.
2.0 Bench tools and hand operations continued.
3.0 Power tools and drilling machines.
4.0 Measuring and gagging
5.0 Engine lathe: basic operations such as facing, cutoff, plain turning, knurling.
6.0 Lathe work continuation: taper turning, drilling and boring.
7.0 Basic shaper operations.
8.0 Milling machine and/or surface grinder.
9.0 Sheet metal working.
10.0 Soldering and brazing.
11.0 Gas welding.
12.0 Electric arc welding.

Engineering Drawing I

COURSE OUTLINE: To develop basic projection concepts with reference to points,
lines, planes and geometrical solids. Also to develop sketching
and drafting skills to facilitate communication.

1.0 Instrumental Drawing, Practices and Techniques (2 hours)
1.1 Equipment and Materials:
Description of drawing instruments, auxiliary equipment and drawing materials
1.2 Techniques of Instrument Drawing:
Pencil sharpening, securing paper, proper use of T-squares, triangles, scales, dividers, compasses, erasing shields, French curves, inking pens.

2.0 Freehand Technical Lettering (4 hours)
2.1 Lettering strokes, letter proportions, use of pencils and pens, uniformity and appearance of letters, freehand techniques, inclined and vertical letters and numerals, upper and lower cases, standard English lettering forms.

3.0 Dimensioning (8 hours)
3.1 Fundamentals and Techniques:
Size and location dimensioning, SI conventions
Use of scales, measurement units, reducing and enlarging drawings
3.2 General Dimensioning Practices:
Placement of dimensions, aligned and unidirectional Recommended practice,
some 50 items.

4.0 Applied Geometry (5 hours)
4.1 Plane Geometrical construction:
Bisecting and trisecting lines and angles, proportional division of lines,
construction of angles, proportional division of lines, construction of angles,
triangles, squares, polygons. Constructions using tangents and circular arcs.
Methods for drawing standard curves such as ellipses, parabolas, hyperbolas,
involutes, spirals, cycloids and helices (cylindrical and helical).
4.2 Solid Geometrical Construction:
Classification and pictorial representation of solid regular objects such as:
Prisms : square, cubical, triangular and oblique
Cylinders : right and oblique
Cones : right and oblique
Pyramids : square, triangular, oblique, truncated
Doubly-Curved and warped Surfaces: sphere, torus, oblate ellipsoid, conoid,
serpentine, paraboloid, hyperboloid.

5.0 Basic Descriptive Geometry (8 hours)
5.1 Introduction:
Application of descriptive geometry principles to the solution of problems involving positioning of objects in three-dimensional space
5.2 The Projection of points, lines and plans in space
5.3 Parallel lines
5.4 True length of lines: horizontal, inclined and oblique lines
5.5 Perpendicular lines
5.6 Bearing of a line
5.7 Point view or end view of a line
5.8 Shortest distance from a point to a line
5.9 Principal lines of a plane
5.10 Edge view of a plane
5.11 True shape of an oblique plane
5.12 Intersection of a line and a plane
5.13 Angle between a line and a plane
5.14 Angle between two intersecting lines
5.15 Angle between two non-intersecting (skew) lines
5.16 Dihedral angle between two planes
5.17 Shortest distance between two skew lines

6.0 Theory of Projection Drawing (5 hours)
6.1 Perspective Projection drawing
6.2 Orthographic projection
6.3 Axonometric projection
6.4 Oblique projection
6.5 First and third angle projection
6.6 Systems and projection

7.0 Multiview Drawings (5 hours)
7.1 Principal Views:
Methods for obtaining orthographic views
Projection of lines, angles and plane surfaces, analysis in three views
Projection of curved lines and surfaces
Object orientation and selection of views for best representation
Full and hidden lines
7.2 Orthographic Drawings:
Making an orthographic drawing
Visualizing objects from the given views
Interpretation of adjacent areas
True-length lines
Representation of holes
Conventional practices

8.0 Sectional Views (4 hours)
8.1 Full section view
8.2 Half section view
8.3 Broken section
8.4 Revolved section
8.5 Removed (detail) section
8.6 Phantom of hidden section
8.7 Auxiliary sectional views
8.8 Specifying cutting planes for sections
8.9 Conventions for hidden lines, holes, ribs, spokes

9.0 Auxiliary Views (5 hours)
9.1 Basic concept and use of auxiliary views
9.2 Drawing methods and types of auxiliary views
9.3 Symmetrical and unilateral auxiliary views
9.4 Projection of curved lines and boundaries
9.5 Line of intersection between two planes
9.6 True size of dihedral angles
9.7 True size and shape of plane surfaces

10.0 Freehand Sketching and Visualization (5 hours)
10.1 Sketching and design:
Value of sketching as part of design
10.2 Techniques of sketching:
Pencil hardness, squared paper, line densities
Techniques for horizontal, vertical and circular lines
10.3 Multiview sketches:
Choice of views, adding detail, dimensioning, title, notes
Proportioning and comparative sizing
10.4 Sketching pictorial views:
General pictorial sketching
Mechanical methods of sketching and proportioning
Isometric sketching
Oblique sketching
Perspective sketching
Conventional treatment of fillets, rounds and screw threads
Sketches of an exploded view to show assembly of components

11.0 Developments and Intersections (9 hours)
11.1 Developments:
General concepts and practical considerations
Development of a right or oblique prism, cylinder, pyramid, and cone
Development of a truncated pyramid and cone
Triangulation method for approximately developed surfaces
Transition pieces for connecting different shapes
Development of a sphere
11.2 Intersections:
Lines of intersection of geometric surfaces
Piercing point of a line and a geometric solid
Intersection lines of two planes
Intersections of prisms and pyramids
Intersection of a cylinder and an oblique plane
Intersection of a sphere and an oblique plane
Constructing a development using auxiliary views
Intersection of two cylinders
Intersection of a cylinder and a cone

DRAWING LABORATORY: 3 hours/week, 13 weeks
1.0 Freehand Technical Lettering and use of Drawing Instruments
2.0 Freehand Technical Lettering and use of Drawing Instruments
3.0 Dimensioning
4.0 Geometrical and Projection Drawing
5.0 Descriptive Geometry
6.0 Descriptive Geometry (cont)
7.0 Projection and Multiview Drawings
8.0 Projection and Multiview Drawings
9.0 Sectional views
10.0 Auxiliary views
11.0 Freehand Sketching and Visualization
12.0 Developments and Intersections
13.0 Developments and Intersections (cont)

Textbooks and Reference Books:
1.0 W.J. Luzadder, "Fundamentals of Engineering Drawing", Prentice Hall, 8th Edition, 1981.
2.0 T.E. French, C.J. Vierck and R. J. Foster, "Engineering Drawing and Graphic Technology", McGraw-Hill, 1981.
3.0 F.E. Giesecke, A. Mitchell, H. C. Spencer and J. T. Dygdone, Macmillan, 8th Edition, 1986.

Communication I (English)

Course Description:
This course is designed for the students of B.E. Level who have completed either Diploma Level in Engineering or I. Sc. It intends to develop and strengthen in them the basic communication skills in the English language with emphasis on reading, writing and speaking.

Course Objectives:
This course intends to develop:
- ability to use language laboratory facility for the practice of listening
pronunciation and oral development.
- intensive reading skills in technical and non-technical reading materials.
- skills in writing memoranda, business letters, applications and proposals.

1. Introduction to pronunciation (2 Hours)
1.1 Phonetic symbols: vowels, diphthongs and consonants.
1.2 Stress: word and connected speech.
1.3 Intonation
1.4 Practice in listening and speaking :
1.5 Effective listening and note taking.
1.6 Telling personal experience and simple incidents.
1.7 Delivering speech with notes and visual aids.

2. Intensive reading: (9 Hours)
2.1 Comprehension
2.2 Understanding: short questions answer
2.3 Contextual grammar

3. Writing: (2 Hours)
3.1 Memoranda
3.2 Business letters
3.3 Application letters
3.4 Proposals

Evaluation Scheme:
A) Internal Assessment:
Proposal writing - 6 marks
Lab - 2 marks
Attendance - 2 marks
Total: 10 marks

B) Semester Exam:
Comprehension - 14 marks
Short questions answer and contextual grammar - 10 marks
Proposal writing or
Business letter / Application - 8 marks
Memo - 4 marks
Stress / Intonation - 4 marks
Total 40 marks
Total (A + B) 50 marks

Reference Books:
1.0 Anne Eisenberg, "Effective Technical Communication", McGraw - Hill. 1982.
2.0 K.W. Hope and T.E. Pearsall, "Reporting Technical Information", 5th Edition Macmillan Publishing Company, New York, 1984.
3.0 G. M. Spankie - "English in use." 1975
4.0 John Swales - "Writing Scientific English" - 1971
5.0 JMcAllister Gmadama - "English for Electrical Engineers" -1976
6.0 Alan Mounfford - "English in Workshop Practice"
7.0 Eric H. Glending - " English in Mechanical Engineering" - 1974
8.0 Geoffrey Leech Jan Svartvik -"A Communicative Grammar of English"

Computer Programing I

Course Objective:
To develop a working knowledge of computer methods, systems, and languages. Emphasis will be given on developing programming skills using C.

1. Introduction to Computers ( 3 hours)
1.1 Historical development and Generation of Computers
1.2 Computer Systems and Organization
1.2.1 Computer Hardware (Block diagram of digital computer)
1.2.2 Computer Software
1.2.3 Programming languages

2. Problem Solving Using Computer ( 4 hours)
2.1 Problem Analysis
2.2 Algorithm Development & Flowcharting
2.3 Coding
2.4 Compilation and Execution
2.5 Debugging and Testing
2.6 Program Documentation

3. Introduction to C ( 3 hours)
3.1 Data types in C
3.2 Arithmetic Expressions
3.3 Structure of C Program

4. Input and Output ( 3 hours )
4.1 Formatted I/O
4.2 Character I/O
4.3 Programs Using I/O statements

5. Structured Programming Fundamentals (7 hours)
5.1 Sequential Structure
5.2 Selective Structure
5.3 Repetitive Structure
5.4 Programs Using Decision making statements and Looping

6. Functions ( 5 hours)
6.1 Introduction
6.2 Function definition and return statement
6.3 Function Prototypes
6.4 Function invocation, Call by value & Call by reference
6.5 Concept of Local, Global, Automatic and Static variables
6.6 Recursive Functions

7. Arrays, Pointers, and Strings ( 10 hours)
7.1 Introduction to Arrays
7.2 Inputting and Outputting Arrays
7.3 Manipulation of Arrays
7.4 Pointers
7.5 Relationship between Arrays and Pointers
7.6 Pointers Arithmetic
7.7 Arrays as function arguments
7.8 Dynamic memory allocation
7.9 String & String handling Functions

8. Structures ( 5 hours )
8.1 Introduction
8.2 Declaring and defining Structures
8.3 Arrays of Structures
8.4 Structures within Structure
8.5 Structure containing Arrays

9. Files and File handling in 'C' ( 5 hours )

• At the end of Course students are recommended to do a simple project using concepts
drawn from the above topics.

Laboratory:
12 laboratory exercises with assignments growing in complexity from entering and running a small given program to the development of program which utilizes the knowledge drawn from entire course.
Out of 3 remaining laboratory sessions, 2 laboratory sessions will be used for developing simple project type experiment and 1 session for evaluation.

References:
1. Kelly & Pohl, "A Book on C", Benjamin/Cummings, 1984.
2. Brian W. Keringhan & Dennis M. Ritchie, "The 'C' Programming Language", PHI
3. Bryons S. Gotterfried, "Programming with 'C' " , TMH
4. Stephen G. Kochan, " Programming in C", CBS publishers & distributors.
5. B. Ram, "Computer Fundamentals "

Physics

Objectives
To provide the concept and knowledge of physics with the emphasis of present day applications. The background of physics corresponding to Proficiency Certificate Level is assumed.

1.0 Oscillations and Simple Harmonic motion (3 Hours)
1.1 Introduction to mean position and restoring force. Elastic restoring force. Hooks
Law. Definition of SHM. Condition of SHM. Rarity of SHM'S. Equation of SHM.
1.2 Examples of SHM: spring-mass system, Physical pendulum and torsional pendulum.
1.3 Damped Oscillations. Equation of damped oscillator. Forced oscillation and resonance.

2.0 Wave in Elastic Media (6 Hours)
2.1 Introduction to the wave process. Types of waves (only introduction). Speed of transverse waves. Dependence of wave velocity from the properties of medium. Equation of wave process; Particle velocity and particle acceleration.
2.2 Energy power and intensity in wave motion. Standing waves and resonance.

3.0 Acoustics (7 Hours)
3.1 Sound waves. Propagation of sound wave in solids, liquids and gases (review). Pressure variation due to waves.
3.2 Energy considerations. Intensity, Intensity level and loudness. Decibel and phon. Introduction to the reflection, refraction, attenuation and diffraction of sound.
3.3 Auditorial acoustics. Reverberation of sound. Sabine's Law. Conditions for good auditorium and concert halls.
3.4 Doppler effect.
3.5 Ultrasound: Introduction and properties. Production of ultrasound by magnetostriction and piezoelectric methods. Uses of ultrasound in distance measurement, signaling. Non-destructive test of structures and materials.

4.0 Electrostatics (8 Hours)
4.1 Electric charge. Coulomb's law of electrostatic field. Lines of force. Calculation of electric field due to dipole, quadrupole, charged ring and linear charge.
4.2 Electric flux. Gauss' Law and its application to charges dielectric sphere.
4.3 Electric potential. Potential, field strength and potential gradient. Potential due to a point charge.
4.4 Potential due to dipole and quadrupole. Electrostatic potential energy.
4.5 Capacitors: Parallel plate capacitor, cylindrical capacitor, spherical capacitor.
4.6 Effect of dielectrics. Determination of relative dielectric Permitivity. Conductors and dielectrics in electric field. E and D fields. Energy stored in electric field. Energy density.
4.7 High intensity electrostatic fields. Uses of static electric fields in Xeroxing and precipitation. Hazard of strong electrostatic fields: lightning.

5.0 Direct current (3 Hours)
5.1 Current and current density. Current flow in solid, liquid and gases. Ohm's law. Resistance's in series and in parallel.
5.2 Kirchhoff's Laws.
5.3 Atomic view of resistivity. Current flow in semiconductors and metals. Temperature dependence of resistivity.
5.4 Energy loss in circuit. Joule's Law of heating effect. Long distance transmission lines.
5.5 Charging and discharging of a capacitor through a resistor. Time constant.

6.0 Magnetism and Magnetic fields. (7 Hours)
6.1 Source of Magnetic fields: Current and permanent magnets. Terrestrial magnetism. Lines of force. Flux of magnetic field and permeability.
6.2 Biot and Savart's law and its application to long straight wire and circular current loop. Amperes theorem and its application to long straight conductor, solenoid and toroid carrying current.
6.3 Magnetic scalar potential and potential gradient.
6.4 Force on moving charge on magnetic field. Hall effort. Force on conductor in magnetic field. Force per unit length between parallel conductors carrying current.
6.5 Faraday's law of electromagnetic induction. Flux linkage. Lenz's law. Selfinduction. Calculation of the coefficient of self-induction for solenoid and toroid.
6.6 LR circuit. Energy stored in magnetic field. Energy density of magnetic field.
6.7 H, B and fields.

7.0 Electromagnetic Oscillations (7 Hours)
7.1 LC oscillations. Analogy to SHM.
7.2 Electromagnetic oscillations of LCR circuit. Forced oscillation of LCR circuit and resonance.

8.0 Electromagnetic waves (4 Hours)
8.1 Equation of continuity as the law of conservation of electric charge. Maxwell equations in integral and differential forms.
8.2 Displacement current and its significance.
8.3 Application of Maxwell equations: wave equations in free space and nonconducting medium.
8.4 Speed of electromagnetic waves. Energy of electromagnetic wave. Poynting vector.

9.0 Optics (15 Hours)
9.1 Introduction to light: Light as EM wave. Geometrical and wave optics. (Concepts only). Review of refraction through lenses. Combination of two lenses separated by distance. Cardinal points. Achromatic combination of two lenses separated by distance
9.2 Monochromatic aberration of lenses. Spherical aberration, astigmatism, coma, curvature of field and distortion. Causes and their minimization.
9.3 Fibre Optics: Introduction to optical fibres as medium for guiding a wave. The meaning of self focussing in optical fibres. Types of optical fibres according to the variation of refractive index within the optical fibres: single mode and multi mode. Uses of laser light in communication.
9.4 Lasers: principle of the generation of laser light. Basic differences of laser light from ordinary light: beam size, non-divergence, and high degree of monochromaticity and coherence. Uses of laser: industrial, medical and communication.
9.5 Interference. Introduction and mathematical theory. Coherent sources. Causes of non-coherence. Examples of the division of wavefront and amplitude. Interference in thin films and wedges. Fringes of equal inclination and fringes of equal thickness. Non-reflecting films. Newton's rings. Uses of interference in analysing the variation of thickness.
9.6 Diffraction: Introduction. Difference between Fresnel and Fraunhoffer diffraction. Difference between interference and diffraction pattern. Explanation of the variation of intensity due to single slit. Diffraction grating. Resolving power to diffraction gratings.
9.7 Polarisation: Visual explanation of polarization wave. Introduction to polarised and non-polarised light. Methods for obtaining polarised light. Malus' Law. Linearly, elliptically and circularly polarized light. Double refraction. Ordinary and extraordinary rays. Positive and negative crystals. Quarter and half-wave plates. Uses of polarised light in stress analysis. Optical activity. Specific rotation. Uses of optical activity in cahharimetry and detection of adulteration.

Text Books
1 Haliday, Resnick and Walker, "Fundamentals of Physics", Fourth Edition, John Wiley and Sons 1988, 1993 and later editions.
2 A.S. Vasudeva, "Modern Engineering Physics", S-Chand & Co 1998, Delhi.
3 Robert Resnick and David Halliday, "Physics: Part I and II", 20th Edition, Wiley Eastern Limited, 1985.

Reference Books:
1 Subramanyam and Brij Lal, "Optics" S-Chand & Co 1994, 1995 Delhi.
2 A.S. Vasudeva, "Concept of Modern Engineering Physics", S-Chand & Co 1998, Delhi.

Laboratory:
1.0 Vibrating string.
2.0 Resonance tube
3.0 Geometrical optics.
4.0 Interference, difference and polarization.
5.0 Electrostatics.
6.0 Field mapping.

Computer first year, First Part

1) EG401SH Mathematics I
2) EG402SH Physics
3) EG442CT Computer Programming I (Programming in C)
4) EG404SH Communication I (English)
5) EG431ME Engineering Drawing I
6) EG432ME Workshop Technology
7) EG439CE Applied Mechanics

First year, First part (I/I)